OMRON Image Processing System FZ5 Series FLV-[]PL Polarizing Plate Instruction Sheet

■Specifications

Item Model FLV-DR3220PL FLV-DR4415PL FLV-DR5303PL FLV-DR6615PL FLV-DR7030PL FLV-DR7000PL FLV-DR9000PL FLV-DR9030PL FLV-DR9215PL FLV-DR12030PL Applicable Lighting FLV-DR3220□ FLV-DR4415□ FLV-DR5030□ FLV-DR6615□ FLV-DR7030□ FLV-DR7000□ FLV-DR9000□ FLV-DR9030□ FLV-DR9215□ FLV-DR12030□

Ambient Temperature Operating: 0 to ＋50℃, Storage: －15 to ＋60℃ (with no icing or condensation) Ambient Humidity Operating and storage: 35% to 85% (with no condensation)

ia .2 ia ia

Vibration Resistance (destructive) 10 to 150 Hz, (0.7mm double amplitude) 80 min. each in X, Y, and Z directions

Model FLV-□PL .6 ia

ia ia

Shock Resistance (destructive) 150 m/s2 3 times each in 6 directions(up/down, left/right, forward/backward)

9D ia

ia Materials ia PC Polarizing Plate Weight Approx.10g Approx.20g Approx.20g Approx.50g Approx.40g Approx.50g Approx.80g Approx.70g Approx.80g Approx.60g Accessories Instruction sheet (this sheet)、Mounting frame Instruction sheet (this sheet)、

Mounting screws(M1.4 set screwx 8)

INSTRUCTION SHEET

Item Model FLV-DL7260PL FLV-DL12060PL FLV-DL15060PL

Thank you for selecting OMRON product. This sheet

Applicable Lighting FLV-DL7260□ FLV-DL12060□ FLV-DL15060□

primarily describes precautions required in installing and

Ambient Temperature Operating: 0 to ＋50℃, Storage: －15 to ＋60℃ (with no icing or condensation)

operating the product.

Ambient Humidity Operating and storage: 35% to 85% (with no condensation)

Before operating the product, read the sheet thoroughly

Vibration Resistance (destructive) 10 to 150 Hz, (0.7mm double amplitude) 80 min. each in X, Y, and Z directions

to acquire sufficient knowledge of the product. For your

Shock Resistance (destructive) 150 m/s2 3 times each in 6 directions(up/down, left/right, forward/backward)

convenience, keep the sheet at your disposal.

Materials PC

TRACEABILITY INFORMATION: Weight Approx.60g Approx.80g Approx.90g Importer in EU: Manufacturer:

Omron Europe B.V. Omron Corporation, Accessories Instruction sheet (this sheet)、 Instruction sheet (this sheet)、 Instruction sheet (this sheet)、

Wegalaan 67-69 Shiokoji Horikawa, Shimogyo-ku, Mounting frame Mounting screws(M1.4 set screw x 8) Mounting screws(M1.4 set screw x 12) 2132 JD Hoofddorp, Kyoto 600-8530 JAPAN The Netherlands

Item Model FLV-BR6022PL FLV-BR8532PL FLV-BR11222PL FLV-BR14030PL FLV-BR15020PL FLV-BR21222PL FLV-BR21230PL FLV-BR38037PL FLV-BR48031PL The following notice applies only to products that carry the CE mark: Applicable Lighting FLV-BR6022□ FLV-BR8532□ FLV-BR11222□ FLV-BR14030□ FLV-BR15020□ FLV-BR21222□ FLV-BR21230□ FLV-BR38037□ FLV-BR48031□

Notice: Ambient Temperature Operating: 0 to ＋50℃, Storage: －15 to ＋60℃ (with no icing or condensation) This is a class A product. In residential areas it may cause radio

interference, in which case the user may be required to take adequate Ambient Humidity Operating and storage: 35% to 85% (with no condensation)

measures to reduce interference. TI T）

Vibration Resistance (destructive) 10 to 150 Hz, (0.7mm double amplitude) 80 min. each in X, Y, and Z directions

TI T）

Shock Resistance (destructive) 150 m/s2 3 times each in 6 directions(up/down, left/right, forward/backward) Materials TI T） PC

© OMRON Corporation 2014 All Rights Reserved. Polarization direction Horizontal Weight Approx.10g Approx.20g Approx.20g Approx.30g Approx.20g Approx.30g Approx.40g Approx.80g Approx.80g

Accessories Instruction sheet (this sheet)、Mounting screws(M1.4 set screw x 4) Instruction sheet (this sheet)、 Mounting screws(M1.4 set screw x 8)

ia ia

PRECAUTIONS FOR SAFE USE

Item Model FLV-BR6022PL-V FLV-BR8532PL-V ia FLV-BR11222PL-V FLV-BR14030PL-V FLV-BR15020PL-V FLV-BR21222PL-V FLV-BR21230PL-V FLV-BR38037PL-V FLV-BR48031PL-V

Please observe the following precautions for safe use of the products. ia Applicable Lighting ia

FLV-BR6022□ FLV-BR8532□ ia FLV-BR11222□ FLV-BR14030□ FLV-BR15020□ FLV-BR21222□ FLV-BR21230□ FLV-BR38037□ FLV-BR48031□

1.Mounting

Ambient Temperature Operating: 0 to ＋50℃, Storage: －15 to ＋60℃ (with no icing or condensation)

　・Always turn off the power of main unit before mounting the polarizing ia ia

Ambient Humidity Operating and storage: 35% to 85% (with no condensation)

　plate.The lighting boby may be very hot in lighting turning on.

・Please be securely tightening the screw. Vibration Resistance (destructive) 10 to 150 Hz, (0.7mm double amplitude) 80 min. each in X, Y, and Z directions

　・Tightening torque: M1.4：0.07N・m

Shock Resistance (destructive) 150 m/s2 3 times each in 6 directions(up/down, left/right, forward/backward)

2.Others

Materials PC

　・Do not attempt to disassemble, deform by pressure, incinerate, repair,

　 or modify this product. Polarization direction Vertical

　・When disposing of the product, treat as industrial waste. Weight Approx.10g Approx.20g Approx.20g Approx.30g Approx.20g Approx.30g Approx.40g Approx.80g Approx.80g 　・If you notice an abnormal condition, immediately stop using the 　

Accessories Instruction sheet (this sheet)、Mounting screws(M1.4 set screw x 4) Instruction sheet (this sheet)、

　 product, turn off the power, and consult your dealer.

Mounting screws(M1.4 set screw x 8)

PRECAUTIONS FOR CORRECT USE ■Mounting the Polarizing Plate

Observe the following to prevent failure, malfunctioning, and adverse effects on ①Mounting FLV-DR□PL and FLV-DL□PL

performance and the device. ・Mounting frame mount type ②Mounting FLV-BR□PL-□

・Mounting screw mounting type

1.Installation site １．Insert the Polarizing Plate from ２．Secure it with M1.4 screws.

Models ： FLV-DR3220PL、FLV-DR4415PL、FLV-DR5030PL、

Do not install in the following locations Models ： FLV-DR12030PL、FLV-DL12060PL、FLV-DL15060PL

　　　　　FLV-DR6615PL、FLV-DR7030PL、FLV-DR7000PL、 　the groove at the end of the illumination.

　・Locations where the ambient temperature exceeds the rated temperature 　　　　　FLV-DR9000PL、FLV-DR9030PL、FLV-DR9215PL、

　 range. ・4-point screw fixing type ・4-point screw fixing type

　　　　　FLV-DL7260PL

　・Locations subject to sudden temperature changes (where condensation will

form). 1.Mount the Polarizing Plate. ２．Mount a mounting frame. 1.Mount the Polarizing Plate. ２．Secure it with M1.4 screws.

　・Locations where the relative humidity is below or above 35 to 85% RH. 　・Locations where there are corrosive or flammable gases. 　・Locations where there is dust, salt, or iron powder. 　・Locations where the device will be subject to direct vibration or shock. TI T） TI T） 　・Locations where there is strong scattered light (laser light, arc welding light,

ultraviolet light, etc.) (M TI T)

・2-point screw fixing type ・2-point screw fixing type

　・Locations exposed to direct sunlight or next to a heater. 　・Locations where there is splashing or spraying of water, oil, or chemicals. 　・Locations where there is a strong electrical or magnetic field. 2.Cleaning 　・Do not use thinners, benzene, acetone, kerosene to clean the product. 　・Please wipe the contamination with a soft cloth included a small amount of alcohol. 3.Static Electricity

LEDs are easily damaged by static electricity. A grounded wrist strap should thus ia

be used when installing or conducting maintenance on the Diffusion Board. Tightening torque：0.07N・m Tightening torque：0.07N・m

③Mounting direction of FLV-□PL 　Mount the plate such that the surface with the polarizing film is placed at the work side.

■Polarizing direction of FLV-BR□PL□

・When arranging the polarizing plates in four mounting directions of FLV-BR□, be sure to use the polarizing plates of the same model for the mutually opposed sides.

　 The polarizing directions of FLV-BR□PL and FLV-BR□PL-V differ as shown below.

FLV-BR□PL FLV-BR□PL-V

FLV-BR□PL

Horizontal polarization Vertical polarization

FLV-BR□PL-V

■Dimensions (Unit:mm)

●FLV-DR3220PL ●FLV-DR4415PL

MOUNTING FRAME

TI T）

MOUNTING FRAME

SECTION A-A

SECTION A-A

●FLV-DR5030PL ●FLV-DR6615PL

MOUNTING FRAME

MOUNTING FRAME

SECTION A-A

SECTION A-A

●FLV-DR7030PL ●FLV-DR7000PL ●FLV-DR9000PL

MOUNTING FRAME

MOUNTING FRAME

MOUNTING FRAME

SECTION A-A AA

SECTION A-A

SECTION A-A