Netgear GS724TS - Smart Gigabit Ethernet Switch GS7xxTS Quick Install Guide
Summary
Enhance your network with this powerful, Gigabit stackable smart switch designed for robust connectivity expansion. The comprehensive manual guides both novice and experienced users through every stage of setup: from physical unboxing and cable connection to advanced IP configuration. Learn how to utilize the Smartwizard Discovery utility to seamlessly integrate and configure your smart devices or workstations quickly, ensuring a high-performance, stable network backbone across your subnet.
Page 1 Text Content
Next, Connect Your Smart Switch in the Correct Now, Configure the Switch with the Order Smartwizard
GS700TS (724TS, 748TS) Series Gigabit Stackable Smart Switch
These instructions assume you are using DHCP in your network. If you are using static IP 1. Click Start > Programs and run Smartwizard. addressing in your network, configure the switch IP address before connecting it to your network. In the absence of a DHCP server, the switch defaults to 192.168.0.239 for its IP
Start Here
address.
Follow these instructions to set up your smart switch. Before proceeding with the smart To configure the switch before connecting it to your network: switch installation, familiarize yourself with the contents of the Resource CD, especially
1. Set up the PC with an IP address in the 192.168.0.x subnet, and connect the PC to the
the reference manuals on your Resource CD.
switch. Then, use the Smartwizard Discovery utility to configure the switch. 2. Connect each PC to an RJ-45 network port on the Switch front panel.
First, Verify Package Contents
Use category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector to connect.
NETGEAR Smart Switch Rubber footpads for tabletop installation
Figure 2
Power cord Rack-mount kit for installing the switch in a 19-inch rack
2. Click Discover to find your switch in the network.
Installation Guide Smart Switch Resource CD with Smartwizard Discovery and Hardware Installation Guide. (A link to the online Software User's Manual is on the Resource CD.) Warranty/Support Information Card
Then, Prepare to Install Your Smart Switch
Prepare a PC with an Ethernet adapter and a CD ROM drive.
Next, Install the Smartwizard Discovery Figure 1
Figure 3
Utility on a PC
3. Connect the Smart Switch to your network. 4. Power on the switch. The Smartwizard Discovery utility finds the switch and displays its MAC Address, IP
1. Insert the resource CD into your CD drive.
Address, and model number. If you cannot configure your switch, verify that the
5. Verify that the PC with the Smartwizard Discovery utility is on the same subnet as the
cable connections are secure, that the IP address configuration of the PC is in the
2. Run the Setup program to install the Smartwizard Discovery. The Installation Wizard switch.
same subnet as the switch.
will guide you through.
Page Summary Contents For Netgear GS724TS - Smart Gigabit Ethernet Switch GS7xxTS Quick Install Guide
Manual Details
| Brand | NETGEAR |
|---|---|
| Pages | 2 |
| File Size | 194.57 KB |
| Published | June 05, 2026 |
Enter the captcha to get the download link:
Frequently Asked Questions
What subnet must my PC use during setup?
The PC with the Smartwizard Discovery utility must be set up with an IP address in the 192.168.0.x subnet.
What is the correct power-on sequence for initial setup?
First, turn on the smart switch and wait two minutes. Next, turn on the computer.
Where can I register my product after setup?
Locate the serial number on the bottom label and use it to register your product at http://www.netgear.com/register.
What should I do if my network uses static IP addresses?
If using static IPs, you must configure the switch IP address before connecting it to the network.