Sanyo PLCSW15 Projector User Guide
Summary
This comprehensive owner's manual is designed for users of the PLC-SW15 Multimedia Projector. It provides detailed instructions on operating this versatile projector, which features adjustable projection sizes up to 200 inches and multiple video/audio inputs (RCA, VGA, etc.). The guide emphasizes critical safety warnings, proper ventilation setup, and best practices to ensure safe operation and maintain peak performance over time.
Page 1 Text Content
Multimedia Projector
MODEL PLC-SW15
Owner's Manual
Page Summary Contents For Sanyo PLCSW15 Projector User Guide
Page 1
Multimedia Projector MODEL PLC-SW15 Owner's Manual
Page 2
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector pr...
Page 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marki...
Page 4
COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are ...
Page 5
TABLE OF CONTENTS FEATURES AND DESIGN COMPUTER MODE SELECTING COMPUTER MODE SELECTING COMPUTER SYSTEM PREPARATION COMPATIBLE COMPUTER SPECIFICATIONS PC ADJUSTMENT NAME OF EACH PART OF THE PROJECTOR PI...
Page 6
FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette...
Page 7
PREPARATION NAME OF EACH PART OF THE PROJECTOR FRONT OF THE CABINET AIR INTAKE VENTS PROJECTION LENS (Both sides and Rear) This projector is equipped with cooling ZOOM RING fans for protection from ov...
Page 8
PREPARATION SETTING-UP THE PROJECTOR CONNECTING THE AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage...
Page 9
PREPARATION POSITIONING THE PROJECTOR ●This projector is designed to project on a f lat ROOM LIGHT projection surface. The brightness in the room has a great ●The projector can be focused from 4.6’(1....
Page 10
PREPARATION MOVING THE PROJECTOR When moving the projector, replace the lens cover and retract the feet to prevent damage to the lens and cabinet. When this projector is not in use for an extended per...
Page 11
CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR VIDEO INPUT JACKS S-VIDEO INPUT JACK (VIDEO/Y, Pb/Cb, Pr/Cr) Connect the S-VIDEO output Connect the composite video VIDEO S – VIDEO from the video e...
Page 12
CONNECTING THE PROJECTOR CONNECTING TO THE VIDEO EQUIPMENT Cables used for connection (✽= Cables are not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • S-VIDEO Cable ✽ • Audio C...
Page 13
CONNECTING THE PROJECTOR CONNECTING TO THE COMPUTER Cables used for connection (✽= Cables are not supplied with this projector.) • VGA CABLE (HDB 15 pin) • CONTROL CABLE FOR PS/2 PORT When connecting ...
Page 14
BEFORE OPERATION OPERATION OF THE REMOTE CONTROL Left Side POWER ON-OFF BUTTON ON-OFF Used to turn the projector on or off. (P19) D.ZOOMKEYSTONE VOLUME COMPUTER BUTTON Used to select COMPUTER input so...
Page 15
BEFORE OPERATION ON-OFF KEYSTONE BUTTON Used to correct the VOLUME BUTTON D.ZOOMKEYSTONE VOLUME keystone distortion. Used to adjust volume. D.ZOOM BUTTON MUTE COMPUTER Used to select DIGITAL ZOOM mode...
Page 16
BEFORE OPERATION TOP CONTROLS AND INDICATORS MENU BUTTON POINT BUTTONS WARNING TEMP. INDICATOR READY INDICATOR Used to open or close Used to select an item or This indicator flashes red This indicator...
Page 17
BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON- WIRELESS REMOTE CONTROL SCREEN MENU. Refer to the following pages to P...
Page 18
BEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode. MODE MENU AUTO IMAGE MENU PC ADJUST MENU SETTING MENU LANGUAGE MENU Used to select Used to adjust Fine Use...
Page 19
BASIC OPERATION TURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTOR Complete the peripheral connections (with Computer, VCR, etc.) before turning on the projector. (Refer to "CONNECTING TO TH...
Page 20
BASIC OPERATION ADJUSTING THE IMAGE ZOOM ADJUSTMENT Turn the ZOOM RING to adjust the projected picture size. Turn the ring to “WIDE” direction to make the image larger, and turn to “TELE” direction to...
Page 21
BASIC OPERATION NO SHOW FUNCTION Press the NO SHOW button on the Remote Control Unit to No show black out the image. This function is cancelled when the NO SHOW button is pressed again or any other fu...
Page 22
COMPUTER MODE SELECTING COMPUTER MODE DIRECT OPERATION MODE button COMPUTER Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER button on the Remote Control Unit. VIDEO...
Page 23
COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. ON-SCREEN...
Page 24
COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which...
Page 25
COMPUTER MODE Total lines The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total dots The number of the total dots in one horizontal period. Adju...
Page 26
COMPUTER MODE PICTURE IMAGE ADJUSTMENTS ADJUST PICTURE IMAGE MANUALLY Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT ...
Page 27
COMPUTER MODE AUTO IMAGE FUNCTION The Auto Image function is provided to automatically adjust Fine sync, Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN ME...
Page 28
COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will ap...
Page 29
VIDEO MODE SELECTING VIDEO MODE DIRECT OPERATION MODE button Select VIDEO mode by pressing the MODE button on the Top COMPUTER Control or the VIDEO button on the Remote Control Unit. VIDEO MENU OPERAT...
Page 30
VIDEO MODE SELECTING COLOR SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. Another dialog box VIDEO SY...
Page 31
VIDEO MODE PICTURE IMAGE ADJUSTMENT ADJUSTING THE PICTURE IMAGE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button...
Page 32
SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will ap...
Page 33
SETTING Power management This function turns the Projection Lamp off when the projector detects signal interruption and the projector is not used for a certain period in order to reduce power consumpt...
Page 34
APPENDIX OPERATING WIRELESS MOUSE The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the ...
Page 35
APPENDIX MAINTENANCE TEMPERATURE WARNING INDICATOR The TEMPERATURE WARNING Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. The Indicator stops flas...
Page 36
APPENDIX LAMP REPLACEMENT When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image becomes dark or the color of the image becomes unnat...
Page 37
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment as described i...
Page 38
APPENDIX Problem: Try these Solution ●Check the batteries. Remote Control Unit ●Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”. does not work. ●Make sure nothing is between the Re...
Page 39
APPENDIX TECHNICAL SPECIFICATIONS Projector Type Multi-media Projector Dimensions (W x H x D) 7.44” x 2.93” x 11.42” (189mm x 74.5mm x 290mm) (not including Adjustable Feet and Lens) Net Weight 5.51 l...
Page 40
Printed in Japan Part No. 610 292 2561 (1AA6P1P2738-- MK6AA) SANYO Electric Co., Ltd
Manual Details
| Brand | Sanyo |
|---|---|
| Pages | 40 |
| File Size | 509.05 KB |
| Published | May 29, 2026 |
96 views
Enter the captcha to get the download link:
Frequently Asked Questions
What safety hazard should I be aware of regarding the light source?
Do not stare directly into the projection lens, as eye damage could result for both adults and children.
What minimum clearance is needed around the projector unit?
You must allow a minimum 20cm distance on the top, sides, and rear to ensure proper air circulation and cooling.
What types of video inputs are supported by this projector?
It accepts RCA connections (Video/Y, Pb/Cb, Pr/Cr), an S-Video Mini DIN 4 pin jack, VGA, HDB Terminal, and a dedicated Computer Input Jack.
Who should perform maintenance or servicing on the unit?
Always refer servicing to qualified service personnel, as there are dangerous voltages within the device.