ESTES 2162 – Big Daddy User Manual
Summary
Construct your own impressive journey with this comprehensive model rocket kit. The manual provides step-by-step instructions for building the entire structure, covering everything from mounting fins and installing the engine block to painting the nose cone and packing the parachute correctly. It guides both beginners and intermediate hobbyists through assembly, ensuring a safe and exciting launch experience with professional quality parts and essential safety protocols.
Page 1 Text Content
司 4NSR
CBA BIG DADPDY
SERIES
Flying Model Rocket Kit Instructions
Skill Level 2
ESTESINPSSTRIES MATERIALS REQUIRED: HOBBY KNIFE, SCISSORS, PENCIL MASKINGTAPE, GLOSS t+295 H Street 了 有 3 Penrose, CD 8i240 BLACKANDYELLOW SPRAY PAINTS,AUTOMOTIVE PRIMER, WHITE ORYELLOW GLUE，
EST 2162 (9-98) 82277
SANDPAPER ALL GLUED AREAS ARE SHADED IN GRAY _ Be sure to read aliinstructions, test ff all parts, and sand if necessary before gluing.
PARTS LAYOUT
@ 幼 ENGINE BLOCK RING #2050 (1) 30164-2
LAUNCH LUG
LL12 CF (1) 38166 < 必
YELLOW ENGINE
SPACERTUBE
ENGINE HOOK ENGINE
EH-2A (1) 35021 ”MOUNTTUBE
FT< 僵 GE22SPPFA 本 2 本 PARACHUTE -24 SHOCK CORD 1 BODYTUBE (1) 35803 144x36 38382 3xt0 (1) 31751
DIE CUT BALSA FIN SHEETS
DIE CUT CENTERING RING CARD (2 32259
C. Insert the engine block ring
8. Place a ring of glue ab into the same end of the ut 1 D. Use the yellow engine spacer (2.5 cm) inside one end of the tube to push the adapter ring
engine mount tube.
engine mount tube. into the engine mounttube up
A. Mark the yellow engine
to the 3/16 (5 mm) mark and
spacertube at 3/16" (5 mm) IMHMEDIATELY REMOVE from one end. YELLOW SPACER TUBEI!
ENGIN3116" 5 mm) 32016 人 my) BLOCK
SN RING
\L__ LA
有 .Measure the engine mount tube from 人 the same end 名 at you inserted the 。 B. Use a hobby knife to make D. Hold the engine hook 于 engine block ring and mark the tube al/8',(3mm) wide slitat the straight and wrap two
at 1/4” (6 mmj, at 1 (2.5 at 2-1/2” (6.4 cm) mark only layers of masking tape
atthe j"(2.5 cm) mark
2-1/2" (6.4 cm) and at 3-7/8" (6.8 cm). C_insertihe engine hook
to secure hook.
into the siit as shown.
@ Copyright 1998 Centuri Corp. All rights reserved.
Page Summary Contents For ESTES 2162 – Big Daddy User Manual
Manual Details
| Brand | Estes |
|---|---|
| Pages | 6 |
| File Size | 18.50 MB |
| Published | June 03, 2026 |
Enter the captcha to get the download link:
Frequently Asked Questions
What tools are needed for initial assembly?
Hobby knife, scissors, pencil, masking tape, glossy/matte black and yellow spray paints, automotive primer, white or yellow glue, and sandpaper.
How should the fins be prepared before attaching them?
Carefully cut shapes from balsa sheets. Stack finished fins, sand edges, and round all leading and trailing edges of the fin body section.
What is important to know about launching materials and safety?
Launch from a large field away from powerlines and buildings. Always follow the NAR Safety Code and use only Estes products for launch equipment.