Siemens Silver WD 1000 TOP WD 1200 User's Manual
Summary
This comprehensive manual provides everything needed for the safe installation, operation, and maintenance of your Siemens washing machine. It guides new owners through initial setup, detailed laundry routines, troubleshooting common issues, and deep cleaning procedures like descaling filters. Designed for first-time users, this resource ensures you maximize your appliance's lifespan while following all necessary operational and electrical safety guidelines.
Page 1 Text Content
Operating and installation instructions
Stop ͣ
Stop ͣ
Stop ͣ
Silver WD 1000 TOP WD 1200
Page Summary Contents For Siemens Silver WD 1000 TOP WD 1200 User's Manual
Page 1
Operating and installation instructions Stop ͣ Stop ͣ Stop ͣ Silver WD 1000 TOP WD 1200
Page 2
Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items and cautions mentioned in the operation and installation instru...
Page 3
Contents Important information Notes on disposal Your new machine s packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . Your old machine . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4
Stop ͣ Stop ͣ Stop ͣ Stop ͣ Stop ͣ Stop ͣ Stop ͣ Stop ͣ Stop ͣ
Page 5
Notes on disposal Safety precautions and warnings The new machine s packaging ! The washing machine must be installed and ! Dispose of packing materials in a respon- operated in a room with the drain....
Page 6
Safety precautions and Getting to know your machine warnings Please look at figures 1 , 2 , 3 , 4 and 5 Taking care of your machine: in these operating instructions. The item ! Do not climb onto the m...
Page 7
Programme, temperature and Function buttons (ON/OFF drying time selectors and additional functions) 2 Fig. , 2 Fig. , The programme selector is used to set the ON / OFF machine to required programme, ...
Page 8
en Function buttons (ON/OFF Special function and additional functions) Quick wash For the small quantity, light dirt, especially Turn the programme selector to N-Short for the clothes in summer, selec...
Page 9
ro ra ll ro ra ro ra rt in -c re ri tt li Programme table (TOP WD1200) ll -c re tt in Always follow the Detergent Additional manufacturers on the and fabric functions care label. softener Programme x....
Page 10
en ro ra ro ra ro ra ll rt in -c re ri tt li Programme table (Silver WD1000) ll -c re tt in Always follow the Detergent Additional manufacturers on the and fabric functions care label. softener Progra...
Page 11
Programme table: drying Cottons + Linens (cotton, linen) Dry weight in kg 0.5 1.0 1.5 2.5 Drying time selector Programme selector Cupboard dry 50 - 60 60 - 70 70 - 80 Iron dry 40 - 50 50 - 60 60 - 70 ...
Page 12
Detergents and fabric-care additives Fig. 11 , 12 Frequent use of insufficient detergent will even- tually become noticeable as follows: You can use detergent which is suitable for - washing appears g...
Page 13
Preparing laundry for washing Sorting the laundry Practical tips Sort the laundry according to the symbols Remove any loose items or metal objects, on the fabric care labels. such as safety pins, pape...
Page 14
en Preparing laundry for drying Sort the laundry according to the symbols Practical tips on the fabric care labels. Only tumble-dry textiles which have been Only put items in the machine which are lab...
Page 15
First wash cycle Opening the door / loading the machine / closing the door Carry out the first wash cycle without laundry to remove any water left over from the factory Open the door tests. 1. Check t...
Page 16
en Setting the programme / Starting the programme / Programme sequence / Altering the programme Your automatic washer/dryer can be used in Washing and drying without any three ways: interruption washi...
Page 17
End of drying programme End of washing programme All programmes end automaticaly after the spin The drying time selector has reached its end cycle, and then door lock lamp will turn on. position. The ...
Page 18
en Cleaning / Maintenance / Frost Protection Before you begin any maintenance work, Cleaning the pump unplug the machine or switch off the fuse. Fig. 15 , 16 , 17 Turn the tap off. The pump must be cl...
Page 19
Cleaning / Maintenance / Frost Protection Cleaning the filters in the water inlet Frost protection Fig. 18 If the machine is located in a room which is The filters in the water inlet must be cleaned i...
Page 20
en Troubleshooting ! Only qualified technicians are permitted to repair electrical appliances. Repairs done by unauthorised persons can lead to considerable damage. Problems Possible causes / remedies...
Page 21
Troubleshooting Spin for dewatering at lower To protect the machine, the sensible selfbalance system starts speed only; or even no spin when clothes are too light/heavy or single item causing un-balan...
Page 22
Installing the machine Built-under or built-in appliance installation ! When installing and connecting the ma- The appliance must be built under or built in chine, special attention must be paid to th...
Page 23
Water supply - cold only Align the machine Fig. 8 Fig. 19 , 21 , 22 ! The machine must be perfectly level with all For the water connection a standard cold- four feet standing on the floor. It must no...
Page 24
en Water Supply Intallation Drainage If you use Chinese type water inlet pipe, ! When installing the machine, do not bend the water connection see fig. 19 , 21 , 22 drain hose or pull on it. Please ob...
Page 28
Contents of this brochure could be changed without written notice. Product Standard: GB 4706.1-1998 GB 4706.24-2000 GB 4706.26-2000 Part No.: 5120003356 Version: 01 Valid date: 2003.1
Manual Details
| Brand | Siemens |
|---|---|
| Pages | 28 |
| File Size | 2.14 MB |
| Published | June 02, 2026 |
83 views
Enter the captcha to get the download link:
Frequently Asked Questions
Where can I find multilingual user manuals?
Contact our local CS center/station or call the customer service free hotline (8008289828).
What is required when disposing of this appliance?
Ensure main joint separation and follow steps 1 through 9, making sure mains voltage matches nameplate specifications.
What safety measures must be followed during electrical connection?
Only use a properly installed socket outlet with grounding contact, and never remove the plug with wet hands.