Philips REMstar Auto A-Flex User Guide
Summary
A comprehensive guide covering the use and operation of the REMstar Auto A-Flex advanced respiratory system. This technical manual informs users about intended therapy settings, mandatory warnings, setup procedures, and daily maintenance. It provides detailed instructions on connecting breathing circuits, utilizing features like Mask Fit Check and Ramp, troubleshooting common issues, and ensuring safe long-term at-home care for all operators and caregivers of this life-support device.
Page 1 Text Content
REMstar Auto A-Flex USER MANUAL
Page Summary Contents For Philips REMstar Auto A-Flex User Guide
Page 1
REMstar Auto A-Flex USER MANUAL
Page 2
© 2010 Koninklijke Philips Electronics N.V. All rights reserved.
Page 3
Table of Contents Intended Use ........................................................................................................................................................... Important ......
Page 4
Cau Tion: U. S. federal law restricts this device to sale by or on the order of a physician. intended use The Respironics REMstar Auto A-Flex system delivers positive airway pressure therapy for the t...
Page 5
note: Please see the “Limited Warranty” section of this manual for information on warranty coverage. Cautions A Caution indicates the possibility of damage to the device. • Pins of connectors should n...
Page 6
System Contents Your REMstar Auto A-Flex system includes the following items: • Device • Reusable gray foam filter • User manual • Disposable ultra-fine filter (optional) • Carrying case • Side cover ...
Page 7
Control Buttons LCD Display Screen Humidifier Icon & Number Settings Control Wheel/Push Button Ramp Button This figure shows the primary control buttons on the device, described in the following t...
Page 8
Installing the Air Filters Cau Tion: A properly installed, undamaged gray foam filter is required for proper operation. The device uses a gray foam filter that is washable and reusable, and a white ul...
Page 9
IMPORTANT: If you are using your device with a humidifier, refer to the instructions included with your humidifier for details on how to power the device and humidifier. Complete the following steps t...
Page 10
Ramp Feature The device is equipped with an optional ramp feature that your home care provider can enable or disable. This feature reduces the air pressure when you are trying to fall asleep and then ...
Page 11
• Flex demo - The Flex setting allows you to set the Flex level prior to beginning therapy. The Flex demo setting allows you to try out the different Flex settings in real time. After a period of time...
Page 12
• Auto on - You can enable this feature if you want the device to automatically turn the airflow on whenever you apply the interface (mask) to your airway. You can also disable this feature. • Auto of...
Page 13
• Days > 4 - This screen displays the cumulative number of device therapy sessions that exceeded 4 hours over a 7 day and 30 day time frame. • Large leak - During any given night, the device recogn...
Page 14
Device Alerts • High Priority: These alerts require immediate operator response. The alert signal consists of a high priority sound, which is a continuous two-beep pattern (indicated in the following ...
Page 15
Alert Audible Visu Al de Vice Action Possible PAtient Action indic Ator indic Ator c Ause Patient Reminder single beep Screen displays Only displayed when Message from Your home care provider may mess...
Page 16
Alert Audible Visu Al de Vice Action Possible PAtient Action indic Ator indic Ator c Ause SD Card: Corrupt • • ◊ ◊ Alert present until A problem Choose “yes” to reformat Screen displays action is take...
Page 17
Troubleshooting The table below lists some of the problems you may experience with your device and possible solutions to those problems. problem Why it happene D What to Do Nothing happens when you Th...
Page 18
accessories There are several accessories available for your REMstar Auto A-Flex system such as a humidifier or a modem. Contact your home care provider for additional information on the available acc...
Page 19
Traveling with the System When traveling, the carrying case is for carry-on luggage only. The carrying case will not protect the system if it is put through checked baggage. For your convenience at se...
Page 20
Specifications Environmental Operating Temperature: 5° to 35° C (41° to 95° F) Storage Temperature: -20° to 60° C (-4° to 140° F) Relative Humidity (operating & storage): 15 to 95% (non-condensing...
Page 21
Maximum Flow Rate (typical) Test pressures (cm H2o) 4.0 8.0 12.0 16.0 20.0 22 mm Measured pressure at the patient 3.6 7.5 11.0 15.0 19.0 tubing connection port (cm H2o) Average flow at the patient 84....
Page 22
Disposal Separate collection for electrical and electronic equipment per EC Directive 2002/96/EC. Dispose of this device in accordance with local regulations. How to Contact Respironics To have your d...
Page 23
Limited Warranty Respironics, Inc. warrants that the system shall be free from defects of workmanship and materials and will perform in accordance with the product specifications for a period of two (...
Page 24
1057243 R04 JR 9/21/2010 EN-DOM
Manual Details
| Brand | Philips |
|---|---|
| Pages | 24 |
| File Size | 1.69 MB |
| Published | June 06, 2026 |
46 views
Enter the captcha to get the download link:
Frequently Asked Questions
Where should I place the Auto A-Flex device?
Ensure proper placement according to the instructions provided. The manual includes a section on where to place the device for optimal operation.
What does the device do if there is an issue during setup?
The device has specific 'Device Alerts' and 'Troubleshooting' sections detailed in the manual that guide users through potential problems.
Does the warranty cover all types of damage?
No. The warranty excludes damage from accident, misuse, abuse, alteration, water ingress, and other defects not related to material or workmanship.
How do I maintain the filters on this system?
The manual details instructions for both 'Installing the Air Filters' and 'Cleaning or Replacing the Filters,' ensuring proper air quality.