Lexmark C792 PRESCRIBE Emulation Technical Reference Guide
Summary
This essential technical guide details the PRESCRIBE emulation option for compatible Lexmark laser printers, enabling them to serve as a functional replacement for Kyocera devices in large corporate environments. Designed for IT professionals and system administrators, the manual provides comprehensive coverage on installation procedures, supported device models, command language deep dives (including BARC and FRPO), system limitations, and certification best practices. It ensures expert understanding of using PRESCRIBE-enabled printing solutions.
Page 1 Text Content
PRESCRIBE Emulation P41f
Technical Reference
April 2012 www.lexmark.com
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. All other trademarks are the property of their respective owners.
© 2012 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550
Page Summary Contents For Lexmark C792 PRESCRIBE Emulation Technical Reference Guide
Page 1
PRESCRIBE Emulation P41f Technical Reference April 2012 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or ot...
Page 2
Contents Contents Introduction.................................................................................................3 Supported devices.........................................................
Page 3
Introduction Introduction The PRESCRIBE emulation option for Lexmark laser printers is an extended version of the firmware that includes a PRESCRIBE language processor. It enables the printer to be an...
Page 4
Introduction Flash memory and hard disk support PRESCRIBE downloaded fonts (LDFC) and PRESCRIBE macros can be stored on either the flash memory or the printer hard disk. Programming is done using the ...
Page 5
Introduction UEL1 @PJL ENTER LANGUAGE = PCL5 ESC E2 (O&3 .......4 EXIT;5 UEL6 1 Universal Exit Language: ESC%-12345X 2 PCL reset command 3 Memorex entry sequence 4 PRESCRIBE commands 5 Memorex exi...
Page 6
Introduction Certification test process The PRESCRIBE emulation option must be thoroughly tested with the customer's applications to determine if it is usable before a customer makes a significant inv...
Page 7
PRESCRIBE commands PRESCRIBE commands Command support for P41F The following table is a list of PRESCRIBE language commands. It includes base level PRESCRIBE, level II extensions, and a few custom und...
Page 8
PRESCRIBE commands Command Description Supported DRP Draw to Relative Position Yes DRPA Draw to Relative Position specified by Angle Yes DUPX select or deselect DUPle X mode Yes DXPG select Duple X Pa...
Page 9
PRESCRIBE commands Command Description Supported PARC2 in Path, draw ARC Yes PAT select fill PATtern Yes PCRP2 in Path, Curve to Relative Position No PCZP2 in Path, Curve to Zero-relative Position No ...
Page 10
PRESCRIBE commands Command Description Supported SETF SET alternate Font Yes SFA1 Set bitmap Font Attributes Yes SFNT2 Select current Fo NT by typeface Yes SIMG1, 2 Set IMa Ge model Yes SLJN2 Set Line...
Page 11
PRESCRIBE commands For more information on PRESCRIBE see the following: Kyocera PRESCRIBE Commands COMMAND REFERENCE, version 4.8 Kyocera PRESCRIBE Commands TECHNICAL REFERENCE, version 4.8 Command ex...
Page 12
PRESCRIBE commands Bar code type Number Supported Code 11 with only “c” checksum (USD-8) No Code 11 with both “c” and “k” checksums (USD-8) No Code 93 with both “c” and “k” checksums (USD-7) No CODABA...
Page 13
PRESCRIBE commands FRPO: Firmware Re Pr Ogram Kyocera printers support a large set of permanent defaults which can be set using the FRPO command. The PRESCRIBE emulation option supports a subset of th...
Page 14
PRESCRIBE commands The odd‑numbered parameters (A1, A3, A5, and A7) specify a whole‑inch value. The even‑numbered parameters (A2, A4, A6, and A8) specify a fraction in 100ths of an inch. Page Length a...
Page 15
PRESCRIBE commands Even though the L parameter values are programmed with respect to letter-size paper, the edge limits are applied in the same manner regardless of the actual paper size. The followin...
Page 16
PRESCRIBE commands Setting PCL Proprinter Line Printer Top and Bottom Margins 1/2 inch Set to edge limits Set to edge limits Default Font Font Mode CR on FF PCL setting Yes Yes Character Wrap at Right...
Page 17
PRESCRIBE commands LA: Character centering This setting emulates certain Kyocera machines that center characters within the spacing. The factory default value is 1 (centering enabled). To disable char...
Page 18
PRESCRIBE commands FRPO LE parameter Paper source Tray 2 Tray 3 Multipurpose tray Tray 4 Tray 5 LF/LG: X and Y offsets for LE source These settings specify the X and Y offsets for shifting pages print...
Page 19
PRESCRIBE commands Proprinter and Line Printer environments are supported, but native Proprinter commands are not supported. SEM 0 = Line Printer SEM 1 = IBM Proprinter X-24E SEM 2 = Diablo 630 SEM 5 ...
Page 20
Fonts Fonts Bitmap font simulation The following table lists the Kyocera resident bitmap fonts, and the PRESCRIBE emulation best-fit fonts which are used from the standard set of PCL resident scalable...
Page 21
Fonts Resident bitmap font substitution table Font # Font # Height Pitch Kyocera font name Best‑fit font name Port. Land. (points) (cpi) Prestige Elite BM7.2-Bold Courier Bold (scalable) 7.2 16.6 Pres...
Page 22
Notices Notices Edition notice April 2012 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLIC...
Page 23
Index Index BARC command 11 storage support bitmap font simulation 20 flash memory 4 printer hard disk 4 supported devices 3 certification test process 6 command support for P41F 7 commands BARC 11 FR...
Manual Details
| Brand | Lexmark |
|---|---|
| Pages | 23 |
| File Size | 916.90 KB |
| Published | June 03, 2026 |
60 views
Enter the captcha to get the download link:
