HP Designjet SD Pro MFP - Scanner Setup Guide - MFP - Assembled Instructions

Summary

This comprehensive guide provides detailed instructions for setting up and maintaining your HP Designjet SD Pro Scanner - MFP. It covers everything from initial assembly, including necessary precautions regarding component weight and side identification (left/right), to post-installation routine care. Users will find essential details on calibrating the scanner, cleaning the scan area, and navigating the built-in touchscreen help system for expert maintenance throughout the device's lifespan.

📄 Preview ‹ PAGE OF 16 ›

‹

HP Designjet SD Pro MFP - Scanner Setup Guide - MFP - Assembled Instructions - Page 1

›

Page 1 Text Content

Read these instructions carefully...

EN In case you have an stand alone scanner, you can skip this step.

What you will need for this procedure

HP Designjet If this scanner is part of the HP Designjet SD Pro MFP, your printer

• Because the scanner is heavy, you may need two people to unpack it. When more than one should already be assembled, working and connected to the network person is needed, the symbol at the foot of this box is displayed. before starting this procedure. For instructions on how to assemble

SD Pro Scanner During the stand assembly you will see some reference to the following symbol labels which the printer, please refer to the assembly poster included with the appear on some items, standing for left side, and right side. printer.

L - Left side R Right side

The HP Designjet SD Pro Scanner -MFP is available in selected countries only. Please contact HP to check availability in your country. JA スタンドアロンスキャナを使用している場合、この手順はスキップできます。このスキャナがHP Designjet SD Pro MFPの一

以下の指示をよくお読みください。部である場合、この手順を始める前に、プリンタを組み立てて EN JA

Assembly Instructions セットアップに必要なもの動作可能な状態にし、ネットワークに接続する必要があります • このスキャナは重いため、開梱する際には2人必要になります。 2人以上で行う必要が。プリンタの組み立て方法についての詳細は、プリンタに同梱されているセットアップポスターを参照してください。

JA ある作業には、このボックスの下部に示した記号が表示されています。

HP Designjet SD Pro MFP 的一部分，在开始执行该过程之前，

ZHCN L - 左側 R 右側

HP Designjet SD Pro Scanner - MFP プリンタは、一部の国でのみ利用できます。お客様の国で利用可能かどうかは、 HPま

組裝說明 ZHTW 若您有獨立式掃描器，您可以跳過此步驟。

ZHCN 请仔细阅读以下说明...

若此掃描器是 HP Designjet SD Pro MFP 的一部分，您的印表機

在机架组装过程中，您会看到某些组件上显示的以下符号标签的一些参考信息，这些标签 KO 독립형 스캐너가 있는 경우 이 절차를 건너뛸 수 있습니다. 이 스 Petunjuk Pemasangan 表示左侧和右侧。 캐너가 HP Designjet SD Pro MFP에 포함되어 있으면 프린터를 L - 左侧 R 右侧 조립 및 작동하여 네트워크에 연결한 다음, 이 절차를 수행하면 仅在某些国家/地区销售 HP Designjet SD Pro Scanner - MFP 打印机。请与 HP 联系以确定是否在您的国家/地区 됩니다. 프린터 조립 방법에 대한 지침은 프린터와 함께 제 공된 销售该款打印机。 조립 포스터를 참조하십시오.

請仔細閱讀下列說明... Jika Anda memiliki pemindai mandiri, Anda dapat melewatkan langkah ini. Jika pemindai ini adalah bagian dari HP Designjet

SD Pro MFP, printer harus sudah terpasang, berfungsi, dan

tersambung ke jaringan sebelum Anda memulai prosedur ini.

Untuk petunjuk tentang cara memasang printer, lihat poster

petunjuk pemasangan yang diberikan bersama printer.

L - 左側 R 號標 HP Designjet SD Pro Scanner - MFP 印表機只有在部分國家/地區提供。請與 HP 聯絡以確認您所在國家/地區的產品可用性。

KO 이 지시사항을 주의깊게 읽으십시오. EN

The panel PC touch screen assembly can

be mounted on either the right or the left

side of the stand.

일부 항목에 표시되며 왼쪽또는 오른쪽을 나타냅니다. JA パネルPC画面は、スタンドの右側また

HP Designjet SD Pro Scanner - MFP 프린터가 선택된 국가에서 사용 가능한지 확인 해당 국가에서 이용 가능한지확인하려 면 HP에 문의하십시오.

Baca petunjuk ini dengan cermat...

Persiapan untuk prosedur ini ZHCN 可以将平板电脑触摸屏组件安装到机架的右侧或左侧。

• Karena pemindai ini berat, Anda mungkin memerlukan bantuan dua orang untuk mengeluar- kannya dari kemasan. Bila diperlukan bantuan beberapa orang, simbol akan tercantum di bagian

bawah kotak kemasan ini. ZHTW 面板電腦觸控螢幕組件可安裝在機架的左側或右側。

Selama pemasangan dudukan, Anda akan melihat beberapa acuan tentang label simbol berikut yang ditampilkan untuk beberapa item di sisi kiri dan kanan. L - Sisi kiri R Sisi kanan KO

패널 PC 터치 스크린 어셈블리는 스탠드의 오른쪽 또는 왼

Printer HP Designjet SD Pro Scanner -MFP hanya tersedia di negara tertentu. Untuk mengetahui

ketersediaan di negara Anda, hubungi HP.

dudukan.

Printed in xxx

Page Summary Contents For HP Designjet SD Pro MFP - Scanner Setup Guide - MFP - Assembled Instructions

Page 1 Read these instructions carefully... EN In case you have an stand alone scanner, you can skip this step. What you will need for this procedure HP Designjet If this scanner is part of the HP Designjet ...

Page 2 EN Box contents Assembly kit contents Box Description Quantity 1. Maintenance sheet supplied 2. Scanner 3. Paper guides Screw M5 x 16 (Torx T25) for stand feet 4. Return guides 5. Microfiber cloth Scr...

Page 3 ZHCN ZHTW 1. 维护表説明 1. 維護頁說明 2. 扫描仪 2. 掃描器 3. 导纸板用于支脚的 M5 × 16 (Torx T25) 螺钉 3. 紙張導板用於底座腳座的 M5 × 16 (Torx 4. 强制回位导向块 4. 復位導板 T25) 螺絲 5. 超细纤维用于支架的 M5 × 8 (Torx T25) 螺钉 5. 微纖維布 6. 文档 CD/DVD 6. 說明文件 ...

Page 4 EN Fix the foot to the leg with 4 screws Fix the other foot to the other leg with 4 screws. Make sure the wheels are locked. Attach the bottom cross bar to the legs using 4 screws. Make sure the holes...

Page 5 Attach the top cross bar to the legs using 4 screws. Slot the supports into the legs, and fix at the desired height EN At this point you must decide on which side you are going to fit the touch screen...

Page 6 Now you need to decide the height adjustment position. Different heights are possible. The arm support bracket (item 18) is If you need to adjust the height to adopt the highest stand Lift the scanner...

Page 7 EN Fix with the four special screws. With the protective foam in place, put the panel PC face Insert the DC adaptor cable and Ethernet cables into The earth cable comes mounted to the panel PC arm. Us...

Page 8 M4x5 + L-key (Torx 20) EN If you want to lock the tilt position of the panel PC, remove Note that the DC adaptor and bracket are mounted The unit is now assembled and should appear as in the Insert th...

Page 9 You are now required to clean the scan area. To do so you From the front of the scanner, press down the lid while Lift the lid towards you to open it completely. Clean the glass with a lint-free cloth...

Page 10 EN Dry the glass fully using a separate clean, dry lint-free cloth Clean the upper precision rollers with a lint-free cloth and a Clean the white pressure rollers with a lint-free cloth and a Clean th...

Page 11 EN Dry the white background plate, rollers, and surrounding Close the scanner cover and push down on the top to lock Insert one end of the y-cable into the DC adapter (under the Fit the cables into th...

Page 12 EN Insert the network cables into the panel PC and insert the Connect the power cord to the y-connector, and into a Switch on the scanner power switch at the rear. Press the power button below the scr...

Page 13 EN You are now required to calibrate the scanner. For this you Note: When switching on the panel PC touch screen a ‘Please To start the maintenance procedure: The maintenance wizard will ask you to in...

Page 14 To add an HP Designjet printer to the printer list in your Next, you should check the TCP/IP settings in your touch scanner software, follow these steps: screen, and correct them if necessary. If you ...

Page 15 For any further information on how to use your scanner, see Keep these instructions the online help system available from your touch screen In order to perform routine maintenance (once a month) you w...

Page 16 Legal notices © Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set ...

Manual Details

Brand	HP
Pages	16
File Size	6.62 MB
Published	June 17, 2026

4 views

Enter the captcha to get the download link:

Frequently Asked Questions

How many people are required to unpack the scanner?

Due to its weight, you may need two people to help unpack the scanner.

When should I perform routine maintenance on the scanner?

It is beneficial to perform routine maintenance once a month, referencing sections like cleaning, alignment, and calibration.

Where can the panel PC touch screen assembly be mounted?

The touch screen assembly can be mounted on either the right or the left side of the stand.