Philips BT136S series Data Handbook
Summary
The BT136S series are passivated triacs from Philips in a SOT428 surface-mount package, available in 600V and 800V variants. With 4A RMS on-state current and 25A surge capability, they feature high commutating dV/dt and support direct and logic-level gate triggering. Applications include motor control, industrial and domestic lighting, heating, and static switching. The SMD package enables compact PCB designs. They target electronics engineers working on AC power control, lighting systems, and industrial switching requiring reliable triac performance.
Page 1 Text Content
查询BT136S series供应商 Philips Semiconductors Product specification
Triacs BT136S series
GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in plastic SYMBOL PARAMETER MAX. MAX. UNIT envelope, suitable for surface mounting, intended for use in BT136S - applications requiring high BT136S - 600F 800F bidirectional transient and blocking
voltage capability and high thermal VDRM Repetitive peak off-state
cycling performance. Typical voltages
applications include motor control, IT(RMS) RMS on-state current
industrial and domestic lighting, ITSM Non-repetitive peak on-state heating and static switching. current
PINNING - SOT428 PIN CONFIGURATION SYMBOL PIN DESCRIPTION tab
MT1 T1T2
MT2 gate
tab MT2
LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VDRM Repetitive peak off-state
voltages
IT(RMS) RMS on-state current full sine wave; Tmb ≤ 107 ˚C ITSM Non-repetitive peak full sine wave; Tj = 25 ˚C prior to
on-state current surge
t = 20 ms t = 16.7 ms
I2t I2t for fusing t = 10 ms 3.1 A2s d IT/dt Repetitive rate of rise of ITM = 6 A; IG = 0.2 A;
on-state current after d IG/dt = 0.2 A/µs triggering T2+ G+ A/µs
IGM Peak gate current VGM Peak gate voltage PGM Peak gate power PG(AV) Average gate power over any 20 ms period 0.5 Tstg Storage temperature -40 ˚C Tj Operating junction ˚C
temperature
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 3 A/µs.
June 2001 Rev 1.300
Page Summary Contents For Philips BT136S series Data Handbook
Manual Details
| Brand | Philips |
|---|---|
| Pages | 6 |
| File Size | 38.89 KB |
| Published | July 04, 2026 |
Enter the captcha to get the download link:
Frequently Asked Questions
What is the maximum RMS on-state current of BT136S series triacs?
The maximum RMS on-state current is 4 A when operating with a full sine wave and mounting base temperature ≤ 107 ˚C.
Can BT136S triacs be used in life support systems?
No, they are not designed for life support applications; use in such systems is at the customer's own risk.
What is the repetitive peak off-state voltage for BT136S-600?
The BT136S-600 has a repetitive peak off-state voltage of 600 V, while the -800 variant is 800 V.
What is the typical thermal resistance from junction to mounting base?
The typical thermal resistance from junction to mounting base for full cycle operation is 3.0 K/W max.