Panasonic BB-HCA2A User Guide

BBHCA2A_IG.fm 1 ページ ２００６年８月８日　火曜日　午前１０時４６分

Installation Guide AC Adaptor Model No. BB-HCA2A Please read this manual before using, and save this Supported Product (Customer-Provided) manual for future reference. This product is the dedicated AC adaptor for some of Panasonic Network Camera Website: our cameras. For the latest information, visit the http://www.panasonic.com/netcam Panasonic Network Camera support website at

http://panasonic.co.jp/pcc/products/en/netwkcam/

How to Use This Manual This manual describes safety instructions, included

Compatible Cameras (as of July 2006)

items, specifications, and how to connect this product.

Model No.: BB-HCM403A Abbreviation Additional network camera models may become available for use with this product.

"Network Camera" is called "Camera" in this manual.

IMPORTANT SAFETY INSTRUCTIONS When using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not expose this product to rain or any type of moisture. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 7. Protect the AC adaptor cord and AC cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from this product. 8. Do not touch the AC adaptor, AC adaptor cord and AC cord during lightning storms. 9. Unplug this product from power outlet when unused for long periods of time. 10. Refer all servicing to qualified service personnel. Servicing is required when this product has been damaged in any way, such as the AC adaptor, AC cord or plug is damaged, or this product does not operate normally. 11. This product is intended for indoor use only. 12. Unplug this product from power outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center. SAVE THESE INSTRUCTIONS

FCC and Other Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.

PQQX15642ZA KK0806JT0