Samsung SP-PL200 Projector User's Manual
Summary
Ensure optimal and safe operation of your electronic appliance with this essential user guide. This comprehensive manual outlines detailed safety precautions concerning electrical shock, fire prevention, installation best practices, movement, and routine cleaning maintenance. It is designed for end-users who require clear instructions on how to position, power, and handle the device correctly, ensuring maximum safety while maintaining product longevity.
Page Summary Contents For Samsung SP-PL200 Projector User's Manual
Page 2
To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instructions marked with this symbol may cause personal ...
Page 3
operable. There is a danger of electric shock or fire. Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it. There is a danger of fire. Unplug the powe...
Page 4
Do not install on an unstable location, or on a stand smaller than the product. If the product falls it may harm children. Install on a flat and stable location as the front part is heavy. In case of ...
Page 5
Do not use or keep the product near flammable sprays or other such substances. There is a danger of fire or explosion. Do not place containers with water, vases, drinks, chemicals, small metal parts o...
Page 6
Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, leading to electric shock or fire. Be sure to contact an authorized service Center, when installing your produ...
Page 7
batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from o...
Page 8
| Product Features | Product Views | Remote Control | Product Specifications | An optical engine adopting new LCD technology - 1024 x 768 panel has been adapted. - Utilizes a 3P-LCD panel. - SP-L250 :...
Page 9
1. Indicators 5. POWER( ) Button - STAND BY (Blue LED) Used to turn the projector on or off. - LAMP (Blue LED) - TEMP (Red LED) 6. Lens Refer to the LED Indications. 7. Remote Control Signal Receiver ...
Page 10
Remote Control/ 1 Batteries (CR2025) Power Cable Cleaning Cloth (Not available in all locations) D-Sub Cable LED Indications :Light is On :Light is Blinking :Light is Off STAND LAMP TEMP Information B...
Page 11
to Cooling mode, because the * Cooling mode: The fan speed has increased and the projector lamp has internal temperature of the been changed to ECO mode. projector has increased beyond Check whether t...
Page 12
| Product Features | Product Views | Remote Control | Product Specifications 1. POWER ( ) Button 2. AUTO Button 3. MENU ( ) Button 4. Move (▲ ▼ ◀ ▶)/( ) Button 5. V.KEYSTONE(+/-) (VERTICAL KEYSTONE)Bu...
Page 13
This is used to quickly return to the last menu used. 10. MUTE ( This is used to temporarily mute the sound. To hear sound again, press the MUTE button again or press the - VOL + button. 11. RETURN ( ...
Page 14
Power Max 280 W Consumption Power Voltage 100~240V AC, 50/60Hz Noise Eco : 30d B, Bright : 32d B Dimensions 11.5 inches(W) x 11.4 inches(D) x 5 inches(H) Weight 3.8 Kg / 8.4 lb Temperature : 41 °F ~ 9...
Page 15
VESA 1280 x 1024 60Hz 63.981 60.020 108.000 VESA 1280 x 1024 70Hz 74.620 70.000 128.943 VESA 1280 x 1024 72Hz 76.824 72.000 132.752 VESA 1280 x 1024 75Hz 79.976 75.025 135.000 VESA 1400 x 1050 60Hz 65...
Page 16
| Basic Settings | Connecting the Power | Connecting an External Device | Installing the Projector Install the projector so that the beam from the projector is perpendicular to the screen. Place the p...
Page 17
You can adjust the size of image within zoom range by manipulating the Zoom Knob. Focus the picture on the screen using the Focus Ring. If your product is installed at a location out of the specified ...
Page 18
This projector is designed to show images optimally on a 80 ~ 120 inch sized screen. A. Screen Z: Throw Distance Y': Distance from Lens Center to Image Bottom Setting up the PC Environment - Check the...
Page 19
Resolution/Size Modes table. 5. Click the [OK] button to close the window, and click the [OK] button of the <Display Properties> window to close the window. The computer may restart automaticall...
Page 20
Check that your PC and projector are turned off. Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. - For the supported input s...
Page 21
Connecting an AV device using a D-Sub cable First, check that the AV device and your projector are turned off. Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the D-Sub termin...
Page 22
Connecting using a Video/S-Video cable First, check that the AV device and your projector are turned off. Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cable (Not supplied)...
Page 24
| Basic Functions | Input | Picture | Setup | Option Turning on the projector Check that the lens cover is opened completely. Turn the power on. Check that the STAND BY LED indicator is turned on. Pre...
Page 25
Screen Description Play/Stop Adjustment Source List You can select a device connected to the projector to display. 1) PC 1 3) AV 2) PC 2 4) S-Video Edit Name You can edit the names of devices connecte...
Page 26
Timing signal. 2) Contrast : Used to adjust the contrast between the object and the background. 3) Brightness : Used to adjust brightness of the entire picture. 4) Sharpness : Used to adjust the sharp...
Page 27
also be shown, though you can view more of the area. In this case, turn Overscan on. Film Mode Using this function, you can set the display mode so it is optimized for playing movies. 1) Off 2) On ▶ F...
Page 28
bright. As the brightness of the lamp increases, the lamp lifetime can be reduced and the noise and power consumption may increase. V-Keystone If video scenes are distorted or tilted, you can compensa...
Page 29
* Click the Play( )/Stop( ) button in the table below to view the video file. Screen Description Play/Stop Adjustment Language You can select the Language used for the menu screen. Menu Option 1) Posi...
Page 30
Sleep Timer If there is no input signal for the specified time, the projector is turned off automatically. (But, for the specified time, there must be no button input from the remote control or the to...
Page 31
| Before Contacting Service Personnel Installation and Connection Symptoms Troubleshooting No Power. Check the power cable connections. I want to install my projector on The ceiling installation suppo...
Page 32
Default>from the menu.
Page 33
| Care and Maintenance | Contact SAMSUNG WORLDWIDE | Authority To clean the exterior and lens of the projector Clean the projector using a soft, dry cloth. Do not clean the projector with flammable su...
Page 34
after a lamp replacement. If the projector does not work properly, please check the operating status of the indicator LED. Contains Mercury, Dispose According to Local, State or Federal Laws Lamp Repl...
Page 35
corrode. If dust cannot be separated from the filter or the filter is torn, it must be replaced. Make sure to select the Reset Filter Time option after replacing or cleaning the filter of the projecto...
Page 36
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung.com/latin VENEZUELA 0-800-100-5303 http://www.samsung.com/latin Europe AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) http://www.samsung.c...
Page 37
http://www.samsung.com/ua_ru UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com/kz_ru Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA http://www.samsung.com/cn http://www.samsun...
Manual Details
| Brand | Samsung |
|---|---|
| Pages | 38 |
| File Size | 1.40 MB |
| Published | June 01, 2026 |
72 views
Enter the captcha to get the download link:
Frequently Asked Questions
How must I unplug or move the product safely?
Before moving or cleaning, first turn off the power and physically pull the plug from the wall socket while holding the plug itself. Always disconnect all connection cables too.
What environments are prohibited for installation?
Do not install the product near sources of moisture, oil, smoke, water, or in poorly ventilated areas like closets or bookshelves.
Is there a risk when using extension cords or multiple outlets?
No. You must not use loose power outlets, damaged cables, or plug multiple devices into a single wall outlet to prevent a fire and electrical shock.
What items should never be inserted into the unit's vents or ports?
Never insert metal objects, wires, gimlets, or any flammable materials such as paper into the vents, PC port, Power port, or Battery port.