PHILIPS 74HC HCT4067 16-channel Analog Multiplexer Demultiplexer User Manual
Summary
The 74HC/HCT4067 is a high-speed, 16-channel analog multiplexer/demultiplexer designed for signal switching in various circuits. This technical manual provides comprehensive product specifications—including electrical characteristics, pinouts, and application guidelines—for integrating this powerful IC into your hardware design. It is essential reading for electronics engineers and circuit designers needing reliable solutions for analog or digital multiplexing tasks, ensuring optimal performance across different voltage levels (VCC).
Page 1 Text Content
INTEGRATED CIRCUITS
DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT4067 16-channel analog multiplexer/demultiplexer
Product specification September
File under Integrated Circuits, IC06
Page Summary Contents For PHILIPS 74HC HCT4067 16-channel Analog Multiplexer Demultiplexer User Manual
Manual Details
| Brand | Philips |
|---|---|
| Pages | 15 |
| File Size | 129.46 KB |
| Published | June 04, 2026 |
Enter the captcha to get the download link:
Frequently Asked Questions
What are the applications of the 74HC/HCT4067?
It can be used for analog multiplexing and demultiplexing, as well as digital multiplexing and demultiplexing, or signal gating.
How does the selection process work using the address inputs (S to S)?
The device uses four address inputs (S to S) and an active LOW enable (E). With E LOW, one of the sixteen switches is selected by S to S, while remaining unselected switches are in high impedance.
What must be observed when swinging the analog inputs/outputs?
The signals can swing between V as a positive limit and GND as a negative limit. The voltage from V to GND may not exceed 10 V.
What determines the dynamic power dissipation (P)?
Power is calculated using the formula: P = C × V × f + ∑{ (C + C ) × V × f }, where C, L, S are capacitances, V is supply voltage, and f is frequency.