EMERSON Manual Flame Simulator FS-HR-975 Rosemount Owner's Manual
Summary
This comprehensive reference manual provides essential guidelines for the safe installation, operation, and maintenance of the Rosemount FS-HR-975 Flame Simulator. It is designed for trained personnel responsible for using or servicing the unit. The manual details critical safety warnings regarding physical access, outlines technical specifications (such as joint dimensions and charging voltage), and explains limited warranty coverage. By adhering to these thorough guidelines, users can ensure optimal system performance and maintain regulatory compliance when working with this specialized equipment.
Page 1 Text Content
Reference Manual 00809-0900-4975, Rev DD May 2022
Rosemount™ FS-HR-975 Flame Simulator
Page Summary Contents For EMERSON Manual Flame Simulator FS-HR-975 Rosemount Owner's Manual
Page 1
Reference Manual 00809-0900-4975, Rev DD May 2022 Rosemount™ FS-HR-975 Flame Simulator
Page 2
Safety information WARNING All individuals who have or will have responsibility for using, maintaining, or servicing this product must read this manual thoroughly. WARNING Physical access Unauthorized...
Page 3
Warranty 1. Limited Warranty . Subject to the limitations contained in Section 2 (Limitation of Remedy and Liability) herein, Seller warrants that (a) the licensed firmware embodied in the Goods will ...
Page 5
Reference Manual Contents 00809-0900-4975 May 2022 Contents Chapter 1 Introduction.............................................................................................................. 1.1 Fla...
Page 6
Contents Reference Manual May 2022 00809-0900-4975 Emerson.com/Rosemount
Page 7
Reference Manual Introduction 00809-0900-4975 May 2022 Introduction To comply with local standards and jurisdictional authorities, perform end-to-end loop testing of fire protection alarm systems, inc...
Page 8
Introduction Reference Manual May 2022 00809-0900-4975 1.4 Structure This device is built from black coated aluminum housing. It includes: Reflector Electronic compartment Battery compartment Hand gri...
Page 9
Reference Manual Introduction 00809-0900-4975 May 2022 Figure 1-2: Flame Simulator rear view A. Hand grip B. Reflector C. Sight D. Back cover locking screw Rosemount FS-HR-975
Page 10
Introduction Reference Manual May 2022 00809-0900-4975 Figure 1-3: Flame Simulator front view A. Hand grip B. Push button C. Sight D. Laser diode Emerson.com/Rosemount
Page 11
Reference Manual Operation 00809-0900-4975 May 2022 Operation 2.1 Unpacking Upon receipt of your device, verify the appropriate purchase order. NOTICE Store the device in a suitable container to preve...
Page 12
Operation Reference Manual May 2022 00809-0900-4975 2.3 Simulator status For the first five seconds, the laser defines the simulator status. Normal status When switching to normal status, the equipmen...
Page 13
Reference Manual Operation 00809-0900-4975 May 2022 See Figure 1-1. 12. Lock the back cover with the locking screw. See Figure 1-2. 2.5 Replace the battery Figure 2-1: Flame simulator battery replacem...
Page 14
Operation Reference Manual May 2022 00809-0900-4975 Emerson.com/Rosemount
Page 15
Reference Manual Troubleshoot 00809-0900-4975 May 2022 Troubleshoot 3.1 LED flashes three times in three consecutive cycles Recommended action Recharge the battery. 3.2 LED flashes three times in five...
Page 16
Troubleshoot Reference Manual May 2022 00809-0900-4975 3.4 Flame simulator seems to work properly but does not activate the flame detector Recommended actions 1. Verify that you are aiming the flame s...
Page 17
Reference Manual Maintenance 00809-0900-4975 May 2022 Maintenance WARNING Explosion Do not open when an explosive atmosphere is present. Only use replaceable battery pack Rosemount 00975-0900-0012. En...
Page 18
Maintenance Reference Manual May 2022 00809-0900-4975 Emerson.com/Rosemount
Page 19
Reference Manual Ordering information 00809-0900-4975 May 2022 Ordering information The kit is supplied in a carry case that includes: Flame simulator Charger Tool kit Reference manual Rosemount FS-HR...
Page 20
Ordering information Reference Manual May 2022 00809-0900-4975 Emerson.com/Rosemount
Page 21
Reference Manual Technical specifications 00809-0900-4975 May 2022 Technical specifications 6.1 Detection ranges per detector/flame simulator Table 6-1: Detection ranges per detector/flame simulator M...
Page 22
Technical specifications Reference Manual May 2022 00809-0900-4975 6.4 Physical specifications Dimensions: 9 in (230 mm) x 7.3 in (185 mm) x 5.35 in (136 mm) Weight: 5.5 lb (2.5 kg) Enclosure: aluminu...
Page 23
Reference Manual Product certifications 00809-0900-4975 May 2022 Product certifications This device is certified to the following standards: 7.1 ATEX and IECEx Ex II 2 G D Ex db ib op is IIB + H2 T4 G...
Page 24
Product certifications Reference Manual May 2022 00809-0900-4975 7.5 Certification instructions The marking of the equipment is: Ex II 2 G DD Ex db ib IIB + H2 T4 Gb Ex ib tb IIIC T135 °C Db Ex ib op ...
Page 25
Reference Manual Product certifications 00809-0900-4975 May 2022 7.5.1 Specific conditions of use The dimensions of the flameproof joints are other than the relevant minimum or maximum values required...
Page 26
Product certifications Reference Manual May 2022 00809-0900-4975 Emerson.com/Rosemount
Page 27
Reference Manual Technical support 00809-0900-4975 May 2022 Technical support For all technical assistance or support contact: Emerson Automation Solutions 6021 Innovation Boulevard Shakopee, MN 55379...
Page 28
Rev. DD For more information: Emerson.com ©2022 Emerson. All rights reserved. Emerson Terms and Conditions of Sale are available upon request. The Emerson logo is a trademark and service mark of Emers...
Manual Details
| Brand | Emerson |
|---|---|
| Pages | 28 |
| File Size | 1.10 MB |
| Published | June 03, 2026 |
68 views
Enter the captcha to get the download link:
Frequently Asked Questions
Can I attempt to repair or modify this flame simulator?
No, the device is not field-repairable due to sensor alignment, and modifying internal circuits will void the warranty.
What are the safety requirements when charging the equipment?
The equipment must only be charged in a safe area with the batteries removed from the flameproof enclosure. The voltage must not exceed 16.8 V.
How long is the limited warranty for different components?
The simulator is covered for 24 months, the battery for 12 months, and the charger for 6 months.
Who should have physical access to this equipment?
Physical access must be restricted to authorized personnel only to protect end user assets from damage or misconfiguration.