Page 1
G Series LCD Monitor G274QPF (3CC2) User Guide
Page 2
Contents Getting Started .............................................................................................................. Package Contents ..................................................
Page 3
Getting Started This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static ...
Page 4
Installing the Monitor Stand 1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove. 2. Tighten the stand bracket with screws. 3. Connect the base to the ...
Page 5
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. Important Avoid touching the display panel when adjusting the monitor. Please slightly...
Page 6
Monitor Overview Getting Started
Page 7
Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. Cable Routing Hole Power Button & Navi...
Page 8
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4. Connect the ...
Page 9
OSD Setup This chapter provides you with essential information on OSD Setup. Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-di...
Page 10
OSD Menus Important The following settings will be grayed out when HDR signals are received: Night Vision Brightness MPRT Contrast Low Blue Light Color Temperature HDCR PIP/PBP OSD Menus
Page 11
Gaming 1st Level Menu 2nd/3rd Level Menu Description Game Mode User Use Up or Down Button to select and preview mode effects. Press the OK Button to confirm and apply your Racing mode type. Night Visi...
Page 12
1st Level Menu 2nd/3rd Level Menu Description Alarm Clock Location Left Top After setting the time, press the OK Button to activate the timer. Right Top Users have to manually restore their preset Lef...
Page 13
Professional 1st Level Menu 2nd Level Menu Description Pro Mode Eco Use Up or Down Button to select and preview mode effects. Press the OK Button to confirm and apply your mode Anti-Blue type. Movie O...
Page 14
Image 1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100 Properly adjust Brightness according to the surrounding lighting. Contrast 0-100 Properly adjust Contrast to relax your eyes. Sharp...
Page 15
PIP/PBP 1st Level Menu 2nd/3rd Level Menu Description OFF ∙ PIP (Picture in Picture) allows users to simultaneously display multiple video sources PIP Source HDMI™ 1 on one screen. One program is disp...
Page 16
Navi Key 1st Level Menu 2nd Level Menu Description Up OFF All Navi Key items can be adjusted via OSD Menus. Down Brightness Game Mode Screen Assistance Alarm Clock Input Source PIP/PBP Mode Refresh Ra...
Page 17
1st Level Menu 2nd Level Menu Description Info. On Screen OFF The information of the monitor status will be shown on the right side of the screen.ON DP Over Clocking OFF To overclock the monitor refre...
Page 18
Specifications Monitor G274QPF Size 27 inch Curvature Flat Panel Type Rapid IPS Resolution 2560 x 1440 Aspect Ratio 16:9 Brightness Typical SDR: 400 nits Peak HDR: 400 nits Contrast Ratio 1000:1 Refre...
Page 19
Monitor G274QPF VESA Mounting Plate Type: 75 x 75 mm Screw Type: M4 x 10 mm • Thread Diameter: 4 mm • Thread Pitch: 0.7 mm • Thread Length: 10 mm Dimension (W x H x D) 613.49 x 402.08 x 196.48 mm Weig...
Page 20
Preset Display Modes Important All information is subject to change without prior notice. Standard Resolution HDMI™ DP/ USB-C VGA 640x480 @60Hz @67Hz @72Hz @75Hz Dos-Mode 720x480 @60Hz 720x576 @50Hz S...
Page 21
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly inst...
Page 22
Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the device or User Guide should be noted. Refer servicing to qualified personnel only. Power Mak...
Page 23
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.c...
Page 24
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certific...
Page 25
Regulatory Notices CE Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibi...
Page 26
WEEE Statement Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of “electrical and electronic equipment” cannot be discarded as mu...
Page 27
Green Product Features Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resource...