Philips TDA10045H DVB-T Channel Receiver Specifications Data Sheet User Manual
Summary
The TDA10045H is a high-performance single-chip receiver designed for DVB-T digital television signals. This manual provides comprehensive technical details on its advanced COFDM demodulation architecture, including full compliance with ETSI standards and support for various signal modes. It features robust hardware solutions like integrated ADCs, PLLs, and pulse killer algorithms to ensure reception stability. Ideal for electronics manufacturers creating broadband or set-top boxes that require reliable, high-quality digital channel tuning and processing capabilities.
Page 1 Text Content
INTEGRATED CIRCUITS
DATA SHEET
TDA10045H DVB-T channel receiver Product specification Nov Supersedes data of Jun File under Integrated Circuits, IC02
Page Summary Contents For Philips TDA10045H DVB-T Channel Receiver Specifications Data Sheet User Manual
Page 1
INTEGRATED CIRCUITS DATA SHEET TDA10045H DVB-T channel receiver Product specification Nov Supersedes data of Jun File under Integrated Circuits, IC02
Page 2
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H FEATURES and 8 kbytes Coded Orthogonal Frequency Division Multiplexer (COFDM) demodulator (fully DVB-T compliant: ETSI 300...
Page 3
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H ORDERING INFORMATION PACKAGE VERSION NUMBER NAME DESCRIPTION TDA10045H QFP100 plastic quad flat package; 100 leads (lead l...
Page 4
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated corre...
Page 5
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H PINNING SYMBOL PIN TYPE DESCRIPTION VDDD33 digital supply voltage for the pads (3.3 V typ.) VSSD digital ground supply (0 ...
Page 6
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H SYMBOL PIN TYPE DESCRIPTION FFT_WIN I/O output or input signal indicating the start of the active data; equals 1 during co...
Page 7
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H SYMBOL PIN TYPE DESCRIPTION DEN output data validation signal; active HIGH during the valid and regular data bytes OCLK ou...
Page 8
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H Notes 1. OD are open-drain outputs, so they must be connected to a pull-up resistor to either VDDD33 or VDDD50 2. All inpu...
Page 9
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H LIMITING VALUES In accordance with the Absolute Maximum Rate System (IEC 60134); note 1. SYMBOL PARAMETER MIN. MAX. UNIT V...
Page 10
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H CHARACTERISTICS SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Core and pads VDDD33 digital supply voltage for the VDDD 3...
Page 11
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Power consumption IDDD digital supply current on fs Mhz; direct IF pins: a...
Page 12
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H APPLICATION INFORMATION handbook, full pagewidth I2C-BUS EEPROM optinal XINVAGC XOUT SDA_EEP IF1 or SCL_EEP IF2IF1 IF_AGC ...
Page 13
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H Tuner TDA10045H RF tracking filter tracks the RF wanted frequency and The chip is controlled by an I2C-bus and driven by a...
Page 14
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H PACKAGE OUTLINE QFP100: plastic quad flat package; 100 leads (lead length 1.95 mm); body 14 x 20 x 2.8 mm SOT317-2 EH A1 (...
Page 15
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H SOLDERING Use a double-wave soldering method comprising a turbulent wave with high upward pressure followed by Introductio...
Page 16
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H Suitability of surface mount IC packages for wave and reflow soldering methods SOLDERING METHOD PACKAGE WAVE REFLOW(1) BGA...
Page 17
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form Life support applications These products are...
Page 18
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H NOTES
Page 19
Philips Semiconductors Product specification DVB-T channel receiver TDA10045H NOTES
Page 20
Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 For sales offices addresses send e-mail to: sal...
Manual Details
| Brand | Philips |
|---|---|
| Pages | 20 |
| File Size | 94.11 KB |
| Published | July 04, 2026 |
2 views
Enter the captcha to get the download link:
