Page 1
GA-F2A88XM-HD3P User's Manual Rev. 1002 12ME-F288H3P-1002R For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product a...
Page 2
Motherboard GA-F2A88XM-HD3P Motherboard GA-F2A88XM-HD3P Dec. 18, 2015 Dec. 18, 2015 Copyright © 2016 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are leg...
Page 3
Table of Contents GA-F2A88XM-HD3P Motherboard Layout ......................................................................4 Chapter 1 Hardware Installation ..............................................
Page 4
GA-F2A88XM-HD3P Motherboard Layout DV VG KB_MS_USB ATX_12V Socket FM2+ SYS_FAN R_USB30 HDMI USB31_LAN ASMedia® DD R3 _2 USB 3.1 Controller CPU_FAN AUDIO DD R3 _1 Realtek® GA-F2A88XM-HD3P Gb E LAN PCIE...
Page 5
Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic dischar...
Page 6
1-2 Product Specifications APU FM2+ Socket: - AMD A series processors - AMD Athlon™ series processors (Go to GIGABYTE's website for the latest APU support list.) Chipset AMD A88X Memory 2 x DDR3 DIMM ...
Page 7
Multi-Graphics Support for 2-Way AMD Cross Fire™ Technology Technology Support for AMD Dual Graphics technology * Only A series APUs support AMD Dual Graphics. Support for AMD Eyefinity technology Sto...
Page 8
BIOS 2 x 64 Mbit flash Use of licensed AMI UEFI BIOS Support for Dual BIOS™ Pn P 1.0a, DMI 2.7, Wf M 2.0, SM BIOS 2.7, ACPI 5.0 Unique Features Support for APP Center * Available applications in APP C...
Page 9
1-3 Installing the APU Read the following guidelines before you begin to install the APU: Make sure that the motherboard supports the APU. (Go to GIGABYTE's website for the latest APU support list.) A...
Page 10
Due to APU limitations, read the following guidelines before installing the memory in Dual Channel mode. 1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed. 2. When ena...
Page 11
D-Sub Port The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200 (the actual resolutions supported depend on the monitor being used). Connect a monitor that s...
Page 12
Line In (Blue) The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. Line Out (Green) The line out jack. Use this audio jack for a headphone or 2-channel sp...
Page 13
DE BU PO RT DEBUG PORT DEBUG PORT 1/2) ATX_12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) DEBUG With the use of the power connector, the power supply can supply enough stable power to...
Page 14
5) SATA3 0/1/2/3/4/5/6/7 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single ...
Page 15
DE BU PO RT 7) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel® High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this...
Page 16
10) F_USB30 (USB 3.0/2.0 Header) The header conforms to USB 3.0/2.0 specification and can provide two USB ports. For purchasing the optional 3.5" front panel that provides two USB 3.0/2.0 ports, ...
Page 17
13) LPT (Parallel Port Header) The LPT header can provide one parallel port via an optional LPT port cable. For purchasing the optional LPT port cable, please contact the local dealer. Pin No. Definit...
Page 18
16) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch...
Page 19
2-1 Startup Screen The following startup Logo screen will appear when the computer boots. (Sample BIOS Version: F1b) Function Keys On the main menu of the BIOS Setup program, press arrow keys to move ...
Page 20
M.I.T. Current Status This screen provides information on CPU/memory frequencies/parameters. Advanced Frequency Settings CPU Clock Control Allows you to manually set the CPU base clock in 1 MHz increm...
Page 21
CPU Core Control Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS to enable all CPU cores (number of cores available depends on the CPU being used)....
Page 22
Advanced Voltage Settings This sub-menu allows you to set CPU, chipset and memory voltages. PC Health Status Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion st...
Page 23
Miscellaneous Settings PCIe Slot Configuration Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation mode is subject to the hardware specification o...
Page 24
2-4 BIOS Features Boot Option Priorities Specifies the overall boot order from the available devices. Removable storage devices that support GPT format will be prefixed with "UEFI:" string o...
Page 25
VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only. EFI Driver Enables EFI option ROM. (Default) This item is configurable only when Fast Boot...
Page 26
Other PCI Device ROM Priority Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. Legacy Op...
Page 27
2-5 Peripherals IOMMU Enables or disables AMD IOMMU support. (Default: Disabled) On Chip USB Controller Enables or disables the integrated USB controller. (Default: Enabled) HD Audio Azalia Device Ena...
Page 28
Onboard USB3.1 Controller (ASMedia® USB 3.1 Controller) Enables or disables the ASMedia® USB 3.1 controller. (Default: Enabled) GFX Configuration Primary Video Device Specifies the first initiation of...
Page 29
Device Mode This item is configurable only when Parallel Port is set to Enabled. Selects an operating mode for the onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP ...
Page 30
Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system. Any key Press any key to turn on the system. Power On Password Set the password when Power On By Keyboard is set to Pas...
Page 31
2-7 Save & Exit Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return...
Page 32
Chapter 3 Appendix 3-1 Configuring a RAID Set RAID Levels RAID 0 RAID 1 RAID 5 RAID 10 Minimum ≥2 ≥3 ≥4 Number of Hard Drives Array Capacity Number of hard Size of the smallest (Number of hard (Number...
Page 33
Running the UEFI RAID Utility Restart your computer and press <F12> to enter the boot device configuration menu. Use the up or down arrow key to select your USB flash drive which is prefixed wit...
Page 34
Deleting an Array The Delete Array(s) menu option allows for deletion of disk array assignments. 1. Select Delete Array(s) in the Main Menu and press <Enter>. 2. In the Arrays section, press the...
Page 35
3-2 Drivers Installation • Before installing the drivers, first install the operating system. (The following instructions use Windows 8.1 as the example operating system.) • After installing the opera...
Page 36
Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthoriz...
Page 37
FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea...
Page 40
Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Market...