Dell SE2422HX Monitor User's Guide
Summary
This document is the official manual for the Dell 24 Monitor SE2422H/SE2422HX User. The manual provides comprehensive guidance on setup, configuration, and operation. Troubleshooting guidance and problem resolution steps are also provided. Technical specifications and compatibility details are included. Safety instructions and regulatory compliance information are covered. Designed for users and IT administrators who need detailed guidance on using and maintaining this monitor.
Page 1 Text Content
Dell 24 Monitor SE2422H/SE2422HX User’s Guide
Model: SE2422H/SE2422HX Regulatory model: SE2422Ht/SE2422Hf/SE2422Hb
Page Summary Contents For Dell SE2422HX Monitor User's Guide
Page 1
Dell 24 Monitor SE2422H/SE2422HX User’s Guide Model: SE2422H/SE2422HX Regulatory model: SE2422Ht/SE2422Hf/SE2422Hb
Page 2
NOTE: A NOTE indicates important information that helps you make better use of your monitor. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed....
Page 3
Contents Safety instructions. About your monitor . Package contents . . . . . . . . . . . . . . . . . . . . . . Product features Identifying parts and controls Front view . . . . . . . . . . . . . . ....
Page 4
Setting up the monitor Connecting the stand . . . . . . . . . . . . . . . . . . . 25 Using the tilt . . . . . . . . . . . . . . . . . . . . . . . . 28 Connecting your monitor . . . . . . . . . . . . ....
Page 5
Safety instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards...
Page 6
About your monitor Package contents NOTE: Some components may be optional and may not ship with your monitor. Your monitor ships with the components shown in the table below. If any component is missi...
Page 7
HDMI cable VGA cable (SE2422HX only) • Quick Setup Guide • Safety, Environmental, and Regulatory Information About your monitor | 7
Page 8
Product features The Dell SE2422H/SE2422HX monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features include: • 60.45 cm (23.8 in....
Page 9
Identifying parts and controls Front view Label Description Use Function buttons For more information, see Operating the monitor. Power LED indicator Solid white light indicates the monitor is turned ...
Page 10
Back view Label Description Use VESA mounting holes (100 mm x Wall mount the monitor using VESA- 100 mm-behind the VESA cover) compatible wall mount kit (100 mm x 100 mm). NOTE: Wall mount kit is not ...
Page 11
Bottom view Label Description Use Security lock slot Secures monitor with security cable lock (sold separately). Power connector Connect the power cable (shipped with your monitor). HDMI port Connect ...
Page 12
Monitor specifications Description Values Screen type Active matrix - TFT LCD Panel type Vertical Alignment (VA) Aspect ratio 16:9 Viewable image dimensions Diagonal 604.50 mm (23.80 in.) Active Area ...
Page 13
Left/Right 12.80 mm Bottom 16.92 mm Adjustability Height adjustable stand NA Tilt -5° to 21° Cable management Yes Dell Display Manager (DDM) Easy Arrange and other key features Compatibility Security ...
Page 14
Preset display modes Display Mode Horizontal Vertical Pixel Clock Sync Polarity Frequency (MHz) (Horizontal/ frequency (k Hz) Vertical) 14 | About your monitor
Page 15
Electrical specifications Description Values Video input signals • HDMI 1.4 , 600m V for each differential line, 100 ohm input impedance per differential pair • Analog RGB, 0.7 Volts +/- 5%, positive ...
Page 16
Physical characteristics Description SE2422H SE2422HX Connector type • One HDMI 1.4 port • One VGA port Signal cable type • HDMI 1.8 m cable • VGA 1.8 m cable (SE2422HX only) Dimensions (with stand) H...
Page 17
Environmental characteristics Description Values Compliant Standards • Ro HS Compliant • BFR/PVC reduced monitor (excluding external cables) • Arsenic-Free glass and Mercury-Free for the panel only Te...
Page 18
Pin assignments VGA connector Pin number 15-pin side of the connected signal cable Video-Red Video-Green Video-Blue GND Self-test GND-R GND-G GND-B Computer 5 V / 3.3 V GND-sync GND DDC data H-sync V-...
Page 19
HDMI port Pin number 19-pin side of Pin 19-pin side of the connected signal number the connected signal cable cable TMDS DATA 2+ TMDS CLOCK SHIELD TMDS DATA 2 SHIELD TMDS CLOCK- TMDS DATA 2- CEC TMDS ...
Page 20
Plug-and-Play You can install the monitor in any Plug-and-Play-compatible system. The monitor automatically provides the computer system with its extended display identification data (EDID) using disp...
Page 21
Ergonomies CAUTION: Improper or prolonged usage of keyboard may result in injury. CAUTION: Viewing the monitor screen for extended periods of time may result in eye strain. For comfort and efficiency,...
Page 22
• Keep the area under your desk clear of obstructions and cables or power cords that may interfere with comfortable seating or present a potential trip hazard. monitor screen at or below eye level mon...
Page 23
Handling and moving your display To ensure the monitor is handled safely when lifting or moving it, follow the guidelines mentioned below: • Before moving or lifting the monitor, turn off your compute...
Page 24
• When lifting or moving the monitor, do not turn the monitor upside down while holding the stand base or stand riser. This may result in accidental damage to the monitor or cause personal injury. Mai...
Page 25
Setting up the monitor Connecting the stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The following instructions are applicable only for the...
Page 26
3. Align the tabs on the stand-riser bracket with the grooves at the back of the monitor. 4. Insert the stand-riser bracket into monitor groove until it snaps into place. 5. Open the monitor protectiv...
Page 27
CAUTION: Hold the stand riser firmly when lifting the monitor to avoid any accidental damage. 6. Hold the stand riser and lift the monitor carefully, then place it on a clean and flat surface. 7. Lift...
Page 28
Using the tilt NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. If you are connecting a stand that you purchased from any other source, follow the...
Page 29
Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. To connect your monitor to the computer: 1. Turn off your computer. 2. Connect ...
Page 30
Connecting the VGA cable Organizing your cables HDMI VGA After connecting all necessary cables to your monitor and computer, (see Connecting your monitor for cable attachment) organize all cables as s...
Page 31
Securing your monitor using Kensington lock (optional) NOTE: Kensington lock is sold separately. The security lock slot is located at the bottom of the monitor. (See Security lock slot) For more infor...
Page 32
Removing the monitor stand CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean and flat surface. NOTE: The following instruc...
Page 33
To remove the VESA cover: Press the dimple on the VESA cover to release it from the back of the display. Wall mounting (optional) NOTE: Use M4 x 10 mm screws to secure the wall-mounting kit to the mon...
Page 34
Operating the monitor Power on the monitor Press the button to turn on the monitor. Using the front panel controls Use the control buttons at the bottom edge of the monitor to adjust the specification...
Page 35
The following table describes the front panel buttons: Front-Panel Button Description Use this button to choose from a list of preset color modes. Shortcut key: Preset Modes Direct access to the Brigh...
Page 36
Using the OSD lock function You can lock the front-panel control buttons to prevent access to the OSD menu and/ or power button. Use the Lock menu to lock the button(s). 1. Select one of the following...
Page 37
Use the front-panel control button to lock the button(s). 1. Press and hold Built-in diagnostics button (button 4) for four seconds, a menu appears on the screen. Dell 24 Monitor Select Option: 2. Sel...
Page 38
Options Description Use this option to run the built-in diagnostics, see Built-in diagnostics. Built-in Diagnostics To unlock the button(s). Press and hold Built-in diagnostics button (button 4) for f...
Page 39
Front-panel button Use the buttons on the front of the monitor to adjust the image settings. Front Panel Button Description Use the Up button to increase values or move up in a menu. Use the Down butt...
Page 40
Using the On-Screen Display (OSD) menu Accessing the menu system NOTE: The changes you make using the OSD menu are automatically saved when you move to another OSD menu, when you exit the OSD menu, or...
Manual Details
| Brand | Dell |
|---|---|
| Pages | 63 |
| File Size | 4.11 MB |
| Published | June 28, 2026 |
6 views
Enter the captcha to get the download link:
Frequently Asked Questions
How do I safely clean my Dell monitor?
Use a soft cloth and a mild detergent solution. Do not use harsh chemicals or solvents.
What should I do if the screen does not fill the entire width?
Ensure the computer is not in sleep mode or the signal cable is properly plugged in. Reset the computer if necessary.
How do I secure the monitor against theft?
Use a Kensington lock to secure the monitor to a desk or immovable object.
What are the electrical safety requirements?
Ensure the monitor is electrically rated to operate with the AC power available in your location.