Page 1
Dell Power Connect W-6000 controller Installation Guide
Page 2
Copyright © 2011 Aruba Networks, Inc. Air Wave®, Aruba Networks®, Aruba Mobility Management System®, and other registered marks are trademarks of Aruba Networks, Inc. Dell™, the DELL™ logo, and Power ...
Page 3
Contents Preface........................................................................................................................................................................5 Overview of th...
Page 4
Removing a Power Supply Chapter 7 Specifications ....................................................................................................................29 Physical Environmental Operation...
Page 5
Preface The preface includes the following information: An overview of the sections in this manual A list of related documentation for further reading A key to the various text conventions used throug...
Page 6
Table 1 Text Conventions <Arguments> In the command examples, italicized text within angle brackets represents items that the user should replace with information appropriate to their specific s...
Page 7
Chapter 1 System Overview The Dell Power Connect W-6000 controller is an enterprise-class, modular chassis which connects, controls, and intelligently integrates wireless Access Points (APs) and Air M...
Page 8
Slot 3: This slot for an additional W-6000M3 module. Module Handles: All module handles are used only for removing and inserting the individual modules. CAUTION: Never use the module handles to lift o...
Page 9
Chapter 2 Installing the Chassis CAUTION: Installation should be performed by a trained technician. This chapter covers the following installation topics: Precautions to observe during installation Re...
Page 10
Precautions CAUTION: Dangerous voltage in excess of 240VAC is always present while the Power Supply Module is plugged into an electrical outlet. Remove all rings, jewelry, and other potentially conduc...
Page 11
12-24 x 5/8” Phillips Head Screws (4x, included) Additionally, the W-6000 controller can be installed in a 19-inch server rack. Installation in a server rack requires the following included items: 6-3...
Page 12
For best operation, keep the W-6000 controller and all cords and cables at least 0.7 meters (2 feet) from fluorescent lighting fixtures, and 2 meters (6 feet) from photocopiers, radio transmitters, el...
Page 13
c. Push the cage nut in towards the rail while rotating the tool up and pulling the tool back toward you until the top lip of the cage nut snaps into position. d. Continue installing the W-6000 contro...
Page 14
Connecting Power CAUTION: This procedure should be performed by a trained technician. 1. Verify you understand the procedure and all precautions. Before beginning, read the entire procedure. Verify yo...
Page 15
Chapter 3 Verifying the Installation Once the W-6000 controller is physically installed, run the following power-on test: 1. Turn on all installed power supplies in quick succession. For each power su...
Page 16
Verifying the Installation Dell Power Connect W-6000 Controller Installation Guide
Page 17
Chapter 4 The Fan Tray The Dell Power Connect W-6000 controller Fan Tray (HW-FT) provides air circulation for cooling the W- 6000M3 modules in the Dell Power Connect W-6000 controller chassis and is r...
Page 18
Figure 5 Dell W-6000 controller Series Fan Tray Module Fastening Screws: These captive screws are used for securing the module into the chassis fan tray slot. Module Handle: This handle is used for re...
Page 19
Replacing a Fan Tray CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, o...
Page 20
As the fan tray reaches the back of the chassis, moderate resistance may be felt. Press firmly so the connectors at the back of the module engage with the backplane, but do not use excessive force. Wh...
Page 21
Chapter 5 Dell Power Connect W-6000M3 The Dell Power Connect W-6000M3 is a hot-swappable controller module for use within a W-6000 controller chassis system. The W-6000 controller chassis is capable o...
Page 22
Dell Power Connect W-6000M3 Dell Power Connect W-6000 Controller Installation Guide
Page 23
Chapter 6 The W-6000 Power Supply Module The Dell Power Connect W-6000 controller Power Supply adapts electrical power for use with the W-6000 controller. The W-6000 chassis has three slots that can h...
Page 24
Physical Description Figure 6 400W Power Supply 6.5A MAX DC OK AC OK Module Fastening Screws: These two captive fastening screws hold the power supply in place in the chassis. Module Handle: This hand...
Page 25
Power Switch: The power switch has two states: Off ( ) and On (|). Power Management The W-6000 controller supports up to three 400 W power supplies. If using one to two primary power supplies for 400 ...
Page 26
3. Verify the power switch on the power supply to be installed is Off ( CAUTION: Never insert or remove a power supply while its power switch is in the On (|) position or if the power cord is plugged ...
Page 27
Depending on the W-6000’s total power load, you may be required to increase the capacity of your site’s electrical systems. See “Power Management” on page 25 for details. CAUTION: For safety reasons, ...
Page 28
The W-6000 Power Supply Module Dell Power Connect W-6000 Controller Installation Guide
Page 29
Chapter 7 Specifications Physical Table 7 Physical Specifications Item Measurement Size Height 14.9 cm (5.85 inches) Width 44.2 cm (17.4 inches) Depth 31.8 cm (12.5 inches) Weight 26.5 KG (58 lbs.) ma...
Page 30
Compliance Electromagnetic Interference United States FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules....
Page 31
Europe WARNING: This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. This product complies ...
Page 32
April 2011 0510763-MU-02 Dell Power Connect W-6000 Controller Installation Guide
Page 33
Dell Power Connect W-6000 Controller Installationsanleitung
Page 34
Copyright © 2011 Aruba Networks, Inc. Air Wave®, Aruba Networks®, Aruba Mobility Management System® und andere eingetragene Marken sind Marken von Aruba Networks, Inc. Dell™, das DELL™-Logo und Power ...
Page 35
Inhalt Vorwort .......................................................................................................................................................................5 Überblick über d...
Page 36
Entfernen eines Netzteils Kapitel 7 Spezifikationen ..................................................................................................................31 Abmessungen und Gewicht...........
Page 37
Vorwort Das Vorwort enthält die folgenden Informationen: Einen Überblick über die einzelnen Abschnitte des vorliegenden Handbuchs Eine Liste verwandter, weiterführender Dokumentationen Eine Erläuterun...
Page 38
Tabelle 1 Textkonventionen Befehle Die fette Courierschrift wird in Befehlsbeispielen für Text verwendet, der von den Benutzern genau so eingegeben werden muss. <Argumente> In Befehlsbeispielen ...
Page 39
Kapitel 1 Systemübersicht Der Dell Power Connect W-6000 Controller ist ein modulares Gehäuse der Enterpriseklasse, mit dem sich drahtlose Access Points (APs) und Air Monitors (AMs) anschließen, steuer...
Page 40
Slot 0: In diesem Steckplatz wird das erforderliche Dell Power Connect W-6000M3 Controller-Modul eingesetzt. Slot 1: In diesen Steckplatz kann ein zusätzliches W-6000M3-Modul eingesetzt werden. Slot 2...