Dell Microprocessor Installation Information Manual User Guide
Summary
This document provides microprocessor installation information for Dell systems. It covers safety precautions, BIOS and BMC firmware updates, and installation procedures for Intel Xeon processors. Installation requiring cover removal should only be performed by trained technicians. It includes instructions for verifying BIOS versions and proper handling to prevent electrostatic discharge. Intended for certified service technicians.
Page 1 Text Content
About Cautions CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Microprocessor Installation Information CAUTION: Any installation that requires removal of the system cover is intended solely to be performed by trained service technicians. See your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge. NOTICE: If the front of your system chassis is labeled with a "II," your system is upgradeable to the Quad-Core Intel® Xeon® Processor 5300 series. See www.dell.com and support.dell.com for information on processor availability and upgrade options for your system. Prior to adding or replacing a processor, you must verify that the latest system BIOS and BMC firmware versions are on your system. Loading the latest BIOS and BMC firmware versions will ensure that the processor is fully supported. NOTICE: Failure to update your system to the latest BIOS and BMC firmware versions prior to installing the microprocessor can result in your system hanging during POST. Check your system BIOS version in the System Setup program. See "Using the System Setup Program" in the Hardware Owner’s Manual included on the CDs provided with your system or on support.dell.com. Check the latest system BIOS version available on support.dell.com. Download and flash the latest BIOS version if necessary. Check your system BMC firmware version in the BMC Configuration Utility. To enter the BMC Configuration Utility, press <Ctrl+E> when prompted during POST. For more information, see the BMC User’s Guide included on the CDs provided with your system or on support.dell.com. Check the latest system BMC firmware version available on support.dell.com. Download and flash the latest BMC firmware, if necessary. Install the processor. See "Installing System Components" in the Hardware Owner’s Manual included on the CDs provided with your system or on support.dell.com.
Information in this document is subject to change without notice. 2006–2007 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Intel and Xeon are registered trademarks of Intel Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
March 2007
Page Summary Contents For Dell Microprocessor Installation Information Manual User Guide
Manual Details
| Brand | Dell |
|---|---|
| Pages | 11 |
| File Size | 683.52 KB |
| Published | June 29, 2026 |
Enter the captcha to get the download link:
Frequently Asked Questions
Who is authorized to open the system cover for installation work?
Only trained service technicians are authorized when removing the system cover.
What label indicates if my computer can be upgraded to a Quad-Core Xeon processor?
If the front of your system chassis is labeled with 'II', it may be upgradeable to the Quad-Core Intel Xeon Processor 5300 series.
What must I update before installing or replacing a new microprocessor?
You must verify that your system has the latest BIOS and BMC firmware versions installed.
What potential issue arises if I fail to update the firmware before CPU installation?
Failure to update can result in your system hanging during POST (Power-On Self Test).