Dell Latitude 5411 - Statement of Volatility

Statement of Volatility – Dell Latitude 5411 CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. The Dell Latitude 5411 contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even after power is removed from the component. The following NV components are present on the 5411’s system board. Table 1. List of Non-Volatile Components on System Board

User Accessible Remedial Action (Action necessary to

Description Reference

Designator Volatility Description for external prevent loss of data)

Part of panel Non Volatile memory, No Part of panel assembly

Panel

assembly 128bytes.

EEDID EEPROM

Non Volatile memory, System No N/A

System UC5

BIOS, embedded controller

and Video BIOS for basic boot operation, PSA (on board diags), PXE diags.

Two Volatile memory in OFF state Yes Power off system

System

SODIMM

Memory –

connectors: NOTE: See state definitions

memory later in text.

JDIMM1,2

present One to Two modules must be populated.

System On System Non Volatile memory 512 No N/A memory memory Bytes. SPD SODIMM(s)

EEPROM JDIMM1,2 Stores memory manufacturer present data and timing information for correct operation of system memory.

RTC UC1 Non Volatile memory, 256 No Remove the onboard CMOS – Bytes.

coin cell

BBRAM

Stores CMOS information.

battery

(battery backed up)

Video For UMA Volatile memory in off state. No memory – platform: UMA uses main system frame using system memory size allocated out of buffer DDR4 main memory.

For DSC Discrete graphics system uses platform: 2GB GDDR5. UV17, UV18

Security U2 (up-sell Non Volatile memory, 128 No N/A

Controller USH Mbit Serial daughter (16Mbyte) Flash board)

Memory Hard User Yes Low level format

SSD (solid

drive(s) replaceable

State flash drive). various sizes in GB

May 2020