Dell Cabling for PowerEdge R820 Owner's Manual
Summary
This technical white paper provides best practices for routing and securing cables exiting the back of the Dell PowerEdge R820 server system. It covers cabling procedures for systems on sliding rails with a Cable Management Arm (CMA), including connecting cables, routing power cables through strain reliefs, installing the CMA, and replacing power supplies with a CMA mounted. The manual is intended for data center infrastructure engineers and IT professionals responsible for server rack installation and cable management.
Page 1 Text Content
Cable Routing Procedures for the Dell Power Edge R820 System
Cable Routing Procedures for the Dell™ Power Edge™ R820 System This Dell Technical White Paper explains the best practices for routing and securing the cables exiting the back of the R820 system.
Greg Henderson and Jose L. Flores
Data Center Infrastructure Engineering
March 2012
Page Summary Contents For Dell Cabling for PowerEdge R820 Owner's Manual
Page 1
Cable Routing Procedures for the Dell Power Edge R820 System Cable Routing Procedures for the Dell™ Power Edge™ R820 System This Dell Technical White Paper explains the best practices for routing and ...
Page 2
Cable Routing Procedures for the Dell Power Edge R820 System This document is for informational purposes only and may contain typographical errors and technical inaccuracies. The content is provided a...
Page 3
Cable Routing Procedures for the Dell Power Edge R820 System Contents Introduction ............................................................................................................. 4 Secti...
Page 4
Cable Routing Procedures for the Dell Power Edge R820 System Introduction This white paper covers recommended cable routing procedures for the Dell™ Power Edge™ R820 system in the following racks: P...
Page 5
Cable Routing Procedures for the Dell Power Edge R820 System 1.2. Routing the power cables through the strain reliefs After you have installed the tray and cables, route the power cables through the s...
Page 6
Cable Routing Procedures for the Dell Power Edge R820 System 1.3.2. Left-side mounting instructions 1. Install the CMA on the rear left side of the rails by attaching both CMA housings to the attachme...
Page 7
Cable Routing Procedures for the Dell Power Edge R820 System Left-side mounted CMA installation (preferred) Figure 5. 1.3.3. Right-side mounting instructions Install the CMA on the rear right side of ...
Page 8
Cable Routing Procedures for the Dell Power Edge R820 System Section 2: Replacing a power supply on a Power Edge R820 system with a CMA 2.1. Replacing a power supply with a left-side mounted CMA 1. Sw...
Page 9
Cable Routing Procedures for the Dell Power Edge R820 System Disconnecting the CMA attachment housings Figure 7. Replacing the outer power supply Figure 8.
Page 10
Cable Routing Procedures for the Dell Power Edge R820 System Section 3: Cabling a Power Edge R820 system on sliding rails without a CMA NOTE: The CMA for the Power Edge R820 system is optional. Withou...
Page 11
Cable Routing Procedures for the Dell Power Edge R820 System Section 4: Cabling a Power Edge R820 system installed on static rails NOTE: The CMA is compatible only with the sliding rails, not the stat...
Manual Details
| Brand | Dell |
|---|---|
| Pages | 11 |
| File Size | 978.98 KB |
| Published | June 27, 2026 |
13 views
Enter the captcha to get the download link:
