Dell 5130cdn Color Laser Printer Statement of Volatility Owner's Manual
Summary
This comprehensive technical supplement provides detailed insight into the internal architecture and electrical components of your color laser printer. It educates users regarding the difference between volatile and non-volatile memory storage within the system board. This guide is essential for technicians and power users who require advanced knowledge of data retention, component failure points, and proper operational procedures to ensure efficient troubleshooting and maintenance of their critical printing hardware.
Page 1 Text Content
Statement of Volatility – Dell 5130cdn CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. The Dell 5130cdn Color Laser Printer contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even after power is removed from the component. The following NV components are present on the system board. Table 1. List of Volatile and Non-Volatile Components on System Board
Volatile/
Color Laser Memory Memory User
Memory Size Non-
Product Application Type Data
Volatile
Firmware, Usage
SIZE NOT
EEPROM Non- No
Statistics,
AVAILABLE
Volatile
Configuration, Fax
Running SIZE NOT FLASH Non- No Code AVAILABLE Volatile
5130cdn Base Memory 256 MB DDR2- Volatile Yes
SDRAM
Optional 1024 MB DDR2- Volatile Yes Memory SDRAM
Drum NA NA Volatile Yes
Fuser NA NA Volatile Yes
Hard Disk 80 GB or HDD Non- Yes
greater Volatile
CAUTION: All other components on the motherboard will lose data if power is removed from the system. Primary power loss (unplugging the power cord) will cause user data on the memory to be lost.
Notes:
• EEROM may be used and could contain user data. • User Data utilized by memory type. • User data is not stored in EEPROM. • User data is not stored in FLASH. • Last Print job latent image from user, overwritten with next print job • Print Job, User data remains as photogene on the surface of Fuser roll. • Print job stay on hard disk
Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.
February 2014
Page Summary Contents For Dell 5130cdn Color Laser Printer Statement of Volatility Owner's Manual
Manual Details
| Brand | Laser |
|---|---|
| Pages | 1 |
| File Size | 56.53 KB |
| Published | May 25, 2026 |
Enter the captcha to get the download link:
Frequently Asked Questions
What kind of data is stored on Non-volatile (NV) components?
The system board contains NV components such as EEPROM, which can potentially store user data.
If the power cord is unplugged, what happens to volatile component data?
All other components on the motherboard will lose their data if primary power is removed from the system.
What are the available memory options for the Dell 5130cdn?
The basic model includes 256 MB DDR2 SDRAM, and an optional upgrade exists up to 1024 MB of DDR2 SDRAM.
Does user data persist after a print job is completed?
User data utilized by memory type. The last latent image from the fuser roll will be overwritten with the next print job.