USB Read Write Memory Adapter MAUSB-300 USER'S GUIDE User's manual, Dell Reference Manual for MAUSB-300 Memory Adapter
Summary
The MAUSB-300 is a high-speed USB Read/Write Memory Adapter designed specifically for transferring large volumes of data to and from xD-Picture Cards. Compatible with both Windows and Macintosh OS, this compact device utilizes the robust USB 2.0 interface, allowing instant plug-and-play access without requiring complex driver installations or separate power supplies. This full manual provides comprehensive instructions on proper setup, card insertion/removal procedures, and best practices for operating your adapter. It is essential reading for digital photographers who need reliable, fast connectivity when moving images from their xD-Picture Cards to a computer.
Page 1 Text Content
USB Read/Write Memory Adapter
MAUSB-300
REFERENCE MANUAL
Page Summary Contents For USB Read Write Memory Adapter MAUSB-300 USER'S GUIDE User's manual, Dell Reference Manual for MAUSB-300 Memory Adapter
Page 1
USB Read/Write Memory Adapter MAUSB-300 REFERENCE MANUAL
Page 2
Introduction Thank you for purchasing our product. The MAUSB-300 USB Read/Write Memory Adapter (hereinafter referred to as “the adapter”) is designed exclusively for reading and writing data to an x D...
Page 3
Contents Introduction Contents What’s included Names of parts Before getting started Windows 98/98SE How to install 1. Turn on the computer ...............................................................
Page 4
What’s included Make sure all the following items are included. If any items are missing, inform the shop from where you purchased the adapter right away. Start Guide MAUSB-300 (Adapter and Cap) Names...
Page 5
Before getting started System requirements Your computer must conform to the following minimum standards in order to use it with the adapter. Compatible operating systems Windows 98/98SE/Me/2000 Profe...
Page 6
Getting started The installation procedure varies depending on the operating system you are using on your computer. Follow the correct procedure for your operating system. Windows Macintosh Check OS.*...
Page 7
Windows 98/98SE How to install When you install the adapter, also refer to your computer’s user manual and the manuals for any optional devices you are using. Turn on the computer <98/98SEInstall&...
Page 8
<98/98SEInstall> 4. When the device driver installation is complete, the window at right appears. Select [Yes,I want to restart my computer now.] if you are ready, then click [OK]. The computer...
Page 9
Connecting to the computer <98/98SEOperation> Connect the adapter’s connector to the USB port on the computer. (You can plug in the USB connector while the computer is in use.) Notes Be sure to...
Page 10
<98/98SEOperation> When you insert the card into the adapter and connect the adapter to the computer, it is recognized as a [Removable Disk] and the status lamp lights up. (If the adapter is co...
Page 11
Removing a card <98/98SEOperation> Before removing a card, close all software programs that are using data on the card (e.g. Explorer, image viewing software), then follow the steps below. Atte...
Page 12
Copying files from/to a card <98/98SEOperation> 1. Insert a card into the adapter and connect it to the computer’s USB port. 2. Double-click [My Computer] from the desktop. 3. To view the conte...
Page 13
Windows Me/2000/XP How to install When you install the adapter, also refer to your computer’s user manual and the manuals for any optional devices you are using. Turn on the computer <Me/2000/XPIn...
Page 14
Connecting to the computer <Me/2000/XPOperation> Connect the adapter’s connector to the USB port on the computer. (You can plug in the USB connector while the computer is in use.) Notes Make su...
Page 15
<Me/2000/XPOperation> When you insert the card into the adapter and connect the adapter to the computer, it is recognized as a [Removable Disk] and the status lamp lights up. (If the adapter is...
Page 16
Removing a card <Me/2000/XPOperation> Before removing a card, close all software programs that are using data on the card (e.g. Explorer, image viewing software), then follow the steps below. A...
Page 17
Disconnecting the adapter <Me/2000/XPOperation> Before disconnecting the adapter from the computer, close all software programs that are using data on the card (e.g. Explorer, image viewing sof...
Page 18
Copying files from/to a card <Me/2000/XPOperation> 1. Insert a card into the adapter and connect it to the computer’s USB port. 2. Double-click [My Computer] from the desktop. 3. To view the co...
Page 19
Mac OS 9 How to install When you install the adapter, also refer to your computer’s user manual and the manuals for any optional devices you are using. Turn on the computer <Mac OS 9Install> Tu...
Page 20
Connecting to the computer <Mac OS 9Operation> Connect the adapter’s connector to the USB port on the computer. (You can plug in the USB connector while the computer is in use.) Notes Make sure...
Page 21
Removing a card <Mac OS 9Operation> Before removing a card, close all software programs that are using data on the card (e. g. image viewing software), then follow the steps below. Attention! I...
Page 22
Copying files from/to a card <Mac OS 9Operation> 1. Insert a card into the adapter and connect it to the computer’s USB port. The status lamp lights, then the card icon appears on the desktop. ...
Page 23
Mac OS X How to install When you install the adapter, also refer to your computer’s user manual and the manuals for any optional devices you are using. Turn on the computer <Mac OS XInstall> Tu...
Page 24
Connecting to the computer <Mac OS XOperation> Connect the adapter’s connector to the USB port on the computer. (You can plug in the USB connector while the computer is in use.) Notes Make sure...
Page 25
Removing a card <Mac OS XOperation> Before removing a card, close all software programs that are using data on the card (e. g. image viewing software), then follow the steps below. Attention! I...
Page 26
Copying files from/to a card <Mac OS XOperation> 1. Insert a card into the adapter and connect it to the computer’s USB port. The status lamp lights, then the card icon appears on the desktop. ...
Page 27
Troubleshooting Windows PROBLEM CAUSE SOLUTIONS REF. PAGE The status lamp does not light. The adapter is not connected Make sure that the adapter is correctly to the computer’s USB facing the right wa...
Page 28
Troubleshooting Windows PROBLEM CAUSE SOLUTIONS REF. PAGE The status lamp goes out after The card is not recognized Disconnect the adapter from the lighting. correctly. computer, pull the card out of ...
Page 29
Specifications Supported x D-Picture Card 3.3 V 16/32/64/128/256/512MB/1GB Cards Interface USB Ver.2.0 or Ver.1.1 Operating voltage 5V ±10% (Powered via USB port) Consumption current 0.5A Max. Operati...
Page 30
Glossary Device Driver A program used to operate or manage a peripheral device (printer, modem, digital (Driver) camera, memory adapter, etc.). Without the proper driver installed, a peripheral device...
Page 31
Glossary of Terms USB Universal Serial Bus. An interface that connects computers with peripheral devices (modems, printers, digital cameras, etc.). Thanks to its ease of use, many devices now come equ...
Page 32
VM015802
Manual Details
| Brand | Dell |
|---|---|
| Pages | 32 |
| File Size | 1.51 MB |
| Published | July 04, 2026 |
5 views
Enter the captcha to get the download link:
Frequently Asked Questions
What memory cards does the MAUSB-300 support?
It is designed exclusively for reading and writing data to xD-Picture Cards.
Do I need to install a driver for Windows 98/98SE?
Yes, you must download and install the device driver from the OLYMPUS web site.
Does the adapter need a separate power supply?
No, it is powered via USB bus power from the connected computer.
Can I connect the adapter without turning off my computer?
Yes, it supports hot plug, allowing connection and disconnection without powering off.