Philips PCA82C250 CAN Controller Interface Data Manual (2)
Summary
Product specification for the Philips PCA82C250 CAN (Controller Area Network) controller interface IC, published January 2000, compliant with ISO 11898 standard. Features high-speed operation up to 1 Mbaud, differential transmit and receive capabilities with wide common-mode range for EMI immunity, bus line transient protection for automotive environments, slope control for RFI reduction, thermal protection, short-circuit proof to battery and ground, and support for at least 110 network nodes. A
Page 1 Text Content
INTEGRATED CIRCUITS
DATA SHEET
PCA82C250 CAN controller interface Product specification Jan Supersedes data of 1997 Oct File under Integrated Circuits, IC18
Page Summary Contents For Philips PCA82C250 CAN Controller Interface Data Manual (2)
Page 1
INTEGRATED CIRCUITS DATA SHEET PCA82C250 CAN controller interface Product specification Jan Supersedes data of 1997 Oct File under Integrated Circuits, IC18
Page 2
Philips Semiconductors Product specification CAN controller interface PCA82C250 FEATURES APPLICATIONS Fully compatible with the “ISO 11898” standard High-speed applications (up to 1 Mbaud) in cars. Hi...
Page 3
Philips Semiconductors Product specification CAN controller interface PCA82C250 BLOCK DIAGRAM handbook, full pagewidth VCC PROTECTION DRIVER SLOPE/ STANDBY HS RXD RECEIVER REFERENCE VOLTAGE PCA82C250 ...
Page 4
Philips Semiconductors Product specification CAN controller interface PCA82C250 FUNCTIONAL DESCRIPTION Pin (Rs) allows three different modes of operation to be selected: high-speed, slope control or s...
Page 5
Philips Semiconductors Product specification CAN controller interface PCA82C250 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); all voltages are referenced to pin 2;...
Page 6
Philips Semiconductors Product specification CAN controller interface PCA82C250 CHARACTERISTICS VCC 4.5 to 5.5 V; Tamb −40 to +125 °C; RL Ω; I8 −10 µA; unless otherwise specified; all voltages referen...
Page 7
Philips Semiconductors Product specification CAN controller interface PCA82C250 SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Rdiff differential input resistance kΩ Ci CANH, CANL input capacitance p...
Page 8
Philips Semiconductors Product specification CAN controller interface PCA82C250 handbook, halfpage +5 V PCA82C250 Vref 100 p F62 Ω GND Rs 30 p F Rext MKA671 Fig.3 Test circuit for dynamic characterist...
Page 9
Philips Semiconductors Product specification CAN controller interface PCA82C250 handbook, full pagewidth hysteresis Vdiff MKA673 Fig.5 Hysteresis. handbook, full pagewidth VCC MKA674t WAKE Fig.6 Timin...
Page 10
Philips Semiconductors Product specification CAN controller interface PCA82C250 handbook, full pagewidth 1.5 V Vdiff MKA675td RXDL Fig.7 Timing diagram for bus dominant to RXD LOW. handbook, full page...
Page 11
Philips Semiconductors Product specification CAN controller interface PCA82C250 APPLICATION INFORMATION handbook, halfpage P8x C592/P8x CE598 CAN-CONTROLLER CTX0 CRX0 CRX1 PX,Y TXD RXD Vref Rs VCC PCA...
Page 12
Philips Semiconductors Product specification CAN controller interface PCA82C250 handbook, full pagewidth SJA1000 CAN-CONTROLLER TX0 TX1 RX0 RX1 TXD RXD Vref Rs VCC PCA82C250 100 n F Rext CAN-TRANSCEIV...
Page 13
Philips Semiconductors Product specification CAN controller interface PCA82C250 INTERNAL PIN CONFIGURATION handbook, full pagewidth VCC PCA82C250 GND MKA679 Fig.11 Internal pin configuration.
Page 14
Philips Semiconductors Product specification CAN controller interface PCA82C250 BONDING PAD LOCATIONS COORDINATES(1) SYMBOL PAD TXD GND VCC RXD Vref CANL CANH Rs Note 1. All coordinates (µm) represent...
Page 15
Philips Semiconductors Product specification CAN controller interface PCA82C250 se at in pl an PACKAGE OUTLINES DIP8: plastic dual in-line package; 8 leads (300 mil) SOT97-1 pin 1 index 10 mm scale DI...
Page 16
Philips Semiconductors Product specification CAN controller interface PCA82C250 SO8: plastic small outline package; 8 leads; body width 3.9 mm SOT96-1 (A )3 AA1 pin 1 index detail X 2.5 5 mm scale DIM...
Page 17
Philips Semiconductors Product specification CAN controller interface PCA82C250 SOLDERING Typical reflow peak temperatures range from to °C. The top-surface temperature of the Introduction packages sh...
Page 18
Philips Semiconductors Product specification CAN controller interface PCA82C250 Suitability of IC packages for wave, reflow and dipping soldering methods SOLDERING METHOD MOUNTING PACKAGE WAVE REFLOW(...
Page 19
Philips Semiconductors Product specification CAN controller interface PCA82C250 DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product...
Page 20
Philips Semiconductors – a worldwide company Argentina: see South America Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 82785, Fax. +31 Australia: 3 Figtree Drive, HOMEBUSH, NSW 21...
Manual Details
| Brand | Philips |
|---|---|
| Pages | 20 |
| File Size | 104.00 KB |
| Published | June 16, 2026 |
6 views
Enter the captcha to get the download link:
Frequently Asked Questions
What is the standard transmission speed and bus compatibility?
It supports high-speed applications up to 1 Mbaud and is fully compatible with the “ISO 11898” standard.
How does the PCA82C250 protect against electrical disturbances?
The device protects bus lines against transients in an automotive environment, ensuring low immunity against ElectroMagnetic Interference (EMI).
What is required to select different operating modes?
Pin 8 (Rs) allows selecting high-speed, slope control, or standby operational modes.
Can the device operate reliably over wide temperatures?
Yes, it operates within an ambient temperature range of -40°C to +125°C.