Philips Electric Shaver PQ256 18 Product Support & User's Guide
Summary
Discover how to keep your Philips shaver running at peak performance. This comprehensive guide provides everything you need, detailing safe operation, complete cleaning routines, and proper maintenance practices. Learn step-by-step care for the shaving units, hair chamber, and charging process. Whether you are a new owner or looking to refresh consistent results, this manual ensures maximum longevity and best grooming experience.
Page 1 Text Content
Register your product and get support at
English Electromagnetic fields (EMF) 4 Push the on/off slide downwards to
www.philips.com/welcome
This Philips appliance complies with all switch off the shaver. standards regarding electromagnetic fields.
Introduction
5 Clean the shaver after every
PQ256, PQ255
If handled properly and according to
Congratulations on your purchase and shave, see chapter ‘Cleaning and
the instructions in this user manual, the
welcome to Philips! To fully benefit from maintenance’.
appliance is safe to use based on scientific
the support that Philips offers, register your
evidence available today. 6 Put the protection cap on the shaver
product at www.philips.com/welcome.
after use to prevent damage and to
Charging
avoid dirt accumulation in the shaving
General description (Fig. 1)
Charge the appliance when the motor heads (Fig. 9).
1 Protection cap
stops or starts running slower.
2 Shaving heads Cleaning and maintenance
When you charge the shaver for the first
3 Shaving unit
time or after a long period of disuse, let it Never use scouring pads, abrasive cleaning
4 Hair chamber
charge continuously for 12 hours. Charging agents or aggressive liquids such as petrol
5 On/off slide
normally takes approx. 8 hours. or acetone to clean the appliance.
6 Front panel
7 Charging light Do not leave the appliance connected to Clean the shaver after every shave to 8 Pouch the mains for more than 24 hours. guarantee better shaving performance. For
9 Foldable plug the best cleaning result, we advise you to
1 Switch off the shaver before you start
10 Release button of foldable plug use Philips Cleaning Spray (HQ110). Ask
charging it.
11 Retaining frame your Philips dealer for information.
12 Central spring of retaining frame 2 Press the release (1) button and
Note: Philips Shaving Head Cleaning Spray
13 Cutter fold out the foldable plug (2)
(HQ110) may not be available in all countries.
14 Guard (‘click’) (Fig. 3).
Contact the Customer Care Centre in your
15 Philips Cleaning Spray (HQ110)
3 Insert the foldable plug unit into the country about the availability of this accessory.
(Optional)
wall socket (Fig. 4).
16 Cleaning brush After every shave: shaving unit
The charging light goes on to indicate
and hair chamber
that the appliance is charging (Fig. 5).
Important
Read this user manual carefully before you 4 Remove the shaver from the wall socket 1 Switch off the shaver. use the appliance and save it for future when the battery is fully charged.
2 Clean the top of the appliance with
reference.
5 Press the release button (1) and the cleaning brush supplied (Fig. 10). Danger fold the foldable plug back into the
3 Pull the shaving unit straight up off the
Keep the appliance dry. appliance (2) (‘click’) (Fig. 6).
shaver (Fig. 11).
This symbol means: Forbidden to clean
Cordless shaving time
under a running tap (Fig. 2). 4 Clean the inside of the shaving unit
A fully charged shaver has a cordless shaving with the cleaning brush (Fig. 12).
Warning
time of approximately 30 minutes.
This appliance is not intended for use 5 Clean the hair chamber with the by persons (including children) with cleaning brush (Fig. 13).
Using the appliance
reduced physical, sensory or mental
The shaver cannot be used directly from 6 Put the shaving unit back onto the
capabilities, or lack of experience and
the mains. shaver (Fig. 14).
knowledge, unless they have been given
supervision or instruction concerning 1 Remove the protection cap. Every two months: shaving heads
use of the appliance by a person
2 Push the on/off slide upwards to
responsible for their safety. Note: Do not use cleaning agents or alcohol
switch on the shaver (Fig. 7).
Children should be supervised to to clean the shaving heads. Only use Philips
ensure that they do not play with the 3 Move the shaving heads over your Cleaning Spray (HQ110). appliance. skin. Make both straight and circular
1 Switch off the shaver.
movements (Fig. 8).
Caution
2 Pull the shaving unit straight up off the
Use and store the appliance at a Note: Shave on a dry face only. Do not use the
shaver (Fig. 11).
temperature between 5°C and 35°C. shaver in combination with gel, foam or water.
Only use the cleaning brush supplied.
Note: Your skin may need 2 or 3 weeks to get
Make sure the cleaning brush remains
accustomed to the Philips shaving system.
clean.
Page Summary Contents For Philips Electric Shaver PQ256 18 Product Support & User's Guide
Manual Details
| Brand | Philips |
|---|---|
| Pages | 3 |
| File Size | 1.59 MB |
| Published | May 31, 2026 |
Enter the captcha to get the download link:
Frequently Asked Questions
How long does a fully charged shaver last without being connected to power?
A fully charged shaver has a cordless shaving time of approximately 30 minutes.
How often should I replace the shaver head?
You should clean the shaving heads every two months and replace them when they are damaged or worn out.
What cleaning method should be used after every shave?
After every shave, use Philips Cleaning Spray (HQ110) and the supplied cleaning brush for optimal results.
Can I wash the shaver under running water?
Yes, the shaver can be used under a running tap, but it must also be cleaned regularly.