IBM NetVista Type 6049 and 2259 Hardware Maintenance Manual
Summary
The essential service guide for IBM NetVista Type 6049 and 2259 Refresh 1.1 systems. This comprehensive manual is designed for technical staff and IT professionals responsible for maintaining and servicing the hardware. It provides crucial, detailed instructions covering full system disassembly, component replacement procedures, necessary safety protocols (including electrical and battery handling), and proper care for connected peripheral devices. Use this guide to ensure efficient, safe maintenance of your legacy enterprise computing infrastructure.
Page 1 Text Content
IBM Net Vista Type 6049 and 2259 Refresh 1.1
IBM Net Vista Type: 6049 and 2259
Hardware Maintenance Manual
Version: HMM02
Version: HMM02 1 of 35
Page Summary Contents For IBM NetVista Type 6049 and 2259 Hardware Maintenance Manual
Page 1
IBM Net Vista Type 6049 and 2259 Refresh 1.1 IBM Net Vista Type: 6049 and 2259 Hardware Maintenance Manual Version: HMM02 Version: HMM02 1 of 35
Page 2
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Safety information DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not connect or dis...
Page 3
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Lithium battery notice CAUTION: Danger of explosion if battery is incorrectly replaced. When replacing the battery, use only IBM Part Number 33F8354 or an ...
Page 4
IBM Net Vista Type 6049 and 2259 Refresh 1.1 CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. Removi...
Page 5
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Getting Started 1.Before you begin, have a Philips medium sized head screwdriver to begin. 2.Locate the 3 screws at the back of the case; use the screwdriv...
Page 6
IBM Net Vista Type 6049 and 2259 Refresh 1.1 3.Using both hands, gently pull back the top cover as shown in the figure. Slide the cover up off the frame of the case. 4. For installing the mainboard, l...
Page 7
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Installing the Power Supply Fan 1.The power supply should be installed in the back of the chassis. This is to draw the air out of the inside of the case. C...
Page 8
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Assembling the Mainboard 1.The plastic spacers provide extreme support in areas of high mechanical stress on your mainboard. Insert the plastic spacers in ...
Page 9
IBM Net Vista Type 6049 and 2259 Refresh 1.1 3.Prepare the CPU, heatsink and the CPU cooling fan. 478 Pins Pentium 4 CPU 4 Pull the CPU socket-locking lever away from the socket to unhook it and raise...
Page 10
IBM Net Vista Type 6049 and 2259 Refresh 1.1 6. Attach the CPU cooling fan on top of the heatsink. Snap the four retention legs of the cooling fan into place. 7. Lock both levers on top of the cooling...
Page 11
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Installing the Memory Modules 9.Open the left and right levers of the slot. Then firmly slide the Memory Module into the DIMM slot. The DIMM slots are keye...
Page 12
IBM Net Vista Type 6049 and 2259 Refresh 1.1 12.Place the mainboard over the mounting brackets. Then slide the mainboard into place as shown in the next figure. 13.Secure the mainboard into the mounti...
Page 13
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Connecting the Power Supply 1.After you have installed the mainboard into the case, you should connect the power cable from the case power supply unit to t...
Page 14
IBM Net Vista Type 6049 and 2259 Refresh 1.1 4. The power connector should fit perfectly in the slot on the ma inboard. Note the orientation of the cables before trying to connect them. Each function ...
Page 15
IBM Net Vista Type 6049 and 2259 Refresh 1.1 7. The storage bay should slide easily back to place. 8. Secure the chassis and the storage bay with screws. Do not over tighten the screws. Gentle pressur...
Page 16
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Installing the CD-ROM, Floppy and Hard Drives 1. There are two different size "bays" into which each of the various drives will fit. Take a close...
Page 17
IBM Net Vista Type 6049 and 2259 Refresh 1.1 3.For the hard disk drive, follow the same manner for installing the floppy disk drive. Always secure the screws when installing the drives. This will prev...
Page 18
IBM Net Vista Type 6049 and 2259 Refresh 1.1 4.For the CD-ROM drive, gently open the door panel. 5. Slide the CD-ROM drive into the bay and align the drive's faceplate with the front of the case. 6. W...
Page 19
IBM Net Vista Type 6049 and 2259 Refresh 1.1 7.Close the door panel. This completes the setup for the CD-ROM drive. 8.Next, you should get familiar with the cables that are used with the various drive...
Page 20
IBM Net Vista Type 6049 and 2259 Refresh 1.1 10.Connect the other end of the cable to the CD-ROM drive. Note the orientation of the cable before trying to connect it. 11. Next, plug the hard disk cabl...
Page 21
IBM Net Vista Type 6049 and 2259 Refresh 1.1 13.Lastly, connect the cables of the floppy drive as you did with the CD-ROM and hard disk drive. The edge of the cable that is yellow should situate firml...
Page 22
IBM Net Vista Type 6049 and 2259 Refresh 1.1 16.Attach the other end of the cable to the controller on the mainboard. See figure for reference. 17.Then attach the other end of the cable to the CD-ROM ...
Page 23
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Connecting the Power LED 1. Connect the Power LED and Power SW cable on the Panel 1 of the mainboard. The Power button located in front of the case only wo...
Page 24
IBM Net Vista Type 6049 and 2259 Refresh 1.1 4. Next, Connect the HDD LED into the connector of the mainboard. The HDD LED indicator has two pins with one of them marked positive. One of the wires fro...
Page 25
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Installing the USB Cable 1. This is the real side of the Dragon system. 2. Remove the dust cover from the COM port as shown in the figure. 3. The figure sh...
Page 26
IBM Net Vista Type 6049 and 2259 Refresh 1.1 5. Remove one screw from the USB bracket using a screwdriver. 6. Then, loosen the screw on the other side. 7. Place the USB cable behind the port. 8. Attac...
Page 27
IBM Net Vista Type 6049 and 2259 Refresh 1.1 9. Using the screwdriver, gently tighten the screws. 10. Following the same procedure in step 8. Attached the other USB cable to the USB port 11. Secure th...
Page 28
IBM Net Vista Type 6049 and 2259 Refresh 1.1 12. This completes the installation for the USB cable. 13. The figure shows the USB connector. 14. Locate the USB2 header on the system board. 15. Connect ...
Page 29
IBM Net Vista Type 6049 and 2259 Refresh 1.1 16. The USB should look like this after it is connected. 17. To reduce unnecessary tangles, place the cables beside the slots as shown in the figure. 18. I...
Page 30
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Installing the Expansion Card 1.The most commonly used expansion card is the AGP and modem card. Let’s start by installing the AGP card first. Remove the d...
Page 31
IBM Net Vista Type 6049 and 2259 Refresh 1.1 4.Secure the AGP card with the screw. 5.Next, install the Modem card as the same way with the AGP card. Insert the Modem card to the first 32-bit PCI slot....
Page 32
IBM Net Vista Type 6049 and 2259 Refresh 1.1 You have finished installing the Modem and AGP cards. Make sure that the add-on cards are installed properly on the mainboard See figure for reference. Ver...
Page 33
IBM Net Vista Type 6049 and 2259 Refresh 1.1 Completing the Assembly 1.When all necessary peripherals and drivers are installed in the case and that there are no loose wires that may get in the way of...
Page 34
IBM Net Vista Type 6049 and 2259 Refresh 1.1 FRU list Items IBM P/N FRU P/N Region Comments Recovery CDs 46P6851 Windows XP Home Simplified Chinese 46P6852 Windows XP Home Traditional Chinese 46P6853 ...
Page 35
IBM Net Vista Type 6049 and 2259 Refresh 1.1 19K2964 19K2965 Hong Kong 56K PCI MODEM CARD/GVC F-1156IV/R9C 19K2964 19K2965 Taiwan 56K PCI MODEM CARD/GVC F-1156IV/R9C 19K2962 19K2963 ASEAN 56K PCI MODE...
Manual Details
| Brand | IBM |
|---|---|
| Pages | 35 |
| File Size | 2.58 MB |
| Published | May 23, 2026 |
123 views
Enter the captcha to get the download link:
Frequently Asked Questions
How do I properly disconnect the power and cables?
First, turn everything OFF, then remove all physical cables from the devices before opening any covers.