GIGABYTE GA- B75M-D3V User's Manual
Summary
Master this core component with comprehensive guidance for your GA-B75M-D3V Motherboard. This user manual is essential for PC builders and system owners, walking you through every step of setup. Coverage includes detailed hardware installation—from CPU mounting to memory and expansion cards—and hands-on instruction for BIOS configuration and driver management. Get started with confidence by understanding the board layout, optimizing power settings, and maximizing your system's full potential.
Page 1 Text Content
GA-B75M-D3V
User's Manual Rev. 1001 12ME-B75MD3V-1001R
Page Summary Contents For GIGABYTE GA- B75M-D3V User's Manual
Page 1
GA-B75M-D3V User's Manual Rev. 1001 12ME-B75MD3V-1001R
Page 2
Motherboard GA-B75M-D3V otherboard -B 75M -D 3V Feb. 8, 2012 Feb. 8, 2012
Page 3
Copyright © 2012 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is...
Page 4
Table of Contents GA-B75M-D3V Motherboard Layout ...............................................................................5 GA-B75M-D3V Motherboard Block Diagram ...................................
Page 5
GA-B75M-D3V Motherboard Layout DV VG i TE KB_MS_USB Su pe r I /O ATX_12V LGA1155 R_USB30 DD R3 _1 USB_LAN SYS_FAN SA TA CPU_FAN SA TA DD R3 _2 AUDIO PCIEX16 GA-B75M-D3V Atheros Gb E LAN PCIEX1_1 M_BIO...
Page 6
GA-B75M-D3V Motherboard Block Diagram 1 PCI Express x16 CPU CLK+/- (100 MHz) LGA1155 DDR3 1600(Note 1)/1333/1066 MHz PCIe CLK CPU Dual Channel Memory (100 MHz) PCI Express Bus MI (C en ter /S ub wo of...
Page 7
Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic dischar...
Page 8
1-2 Product Specifications ® Core™ i7 processors/Intel® Core™ i5 processors/ CPU Support for Intel Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 pac...
Page 9
Internal 1 x 24-pin ATX main power connector Connectors 1 x 4-pin ATX 12V power connector 1 x SATA 6Gb/s connector 5 x SATA 3Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x fr...
Page 10
Bundled Norton Internet Security (OEM version) ® Rapid Start Technology Software Intel ® Smart Connect Technology Intel ® Small Business Advantage Intel Operating ® Windows 7/XP Support for Mi...
Page 11
1-4 Installing the Memory Read the following guidelines before you begin to install the memory: Make sure that the motherboard supports the memory. It is recommended that memory of the • same capacity...
Page 12
1-6 Back Panel Connectors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. PS/2 K...
Page 13
Mic In Jack (Pink) The default Mic in jack. Microphones must be connected to this jack. To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audi...
Page 14
DEBUG PORT 1/2) ATX_12V/ATX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the mo...
Page 15
DEBUG PORT DEBUG PORT 3/4) CPU_FAN/SYS_FAN (Fan Headers) All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to c...
Page 16
6) SATA3 0 (SATA 6Gb/s Connectors, Controlled by Intel B75 Chipset) The SATA connector conforms to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector...
Page 17
8) F_PANEL (Front Panel Header) Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator on the chassis to this header according to the pin assignme...
Page 18
9) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this header. Make...
Page 19
11) F_USB30 (USB 3.0/2.0 Header) The header conforms to USB 3.0/2.0 specification and can provide two USB ports. For purchasing the optional 3.5" front panel that provides two USB 3.0/2.0 ports, ...
Page 20
13) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, use a...
Page 21
Chapter 2 BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-Test (POST)...
Page 22
2-2 The Main Menu On the main menu of the BIOS Setup program, press arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Or you can use your mouse to select the it...
Page 23
Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to...
Page 24
M.I.T. Current Status ` This screen provides information on CPU/memory frequencies/parameters. Advanced Frequency Settings ` Internal Graphics Clock & Allows you to set the onboard graphics clock....
Page 25
CPU Clock Ratio, CPU Frequency & The settings under the two items above are synchronous to those under the same items on the Advanced Frequency Settings menu. (Note) Real-Time CPU Ratio Control In...
Page 26
(Note) Extreme Memory Profile (X.M.P.) & Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. Disabled Disables this function. (Default) Profile...
Page 27
Profile DDR Voltage & When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this item will display as 1.50V. When Extreme Memory Profile (X.M.P.) is set to Prof...
Page 28
PC Health Status ` Reset Case Open Status & Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and t...
Page 29
Slope PWM & Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is set to Manual. Options are: 0.75 PWM value /o C ~ 2.50 PWM value /o C. System Fan ...
Page 30
System Time & Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:0:0. Use <Enter> to switch between the Hour, Minute, and Second fields and use the ...
Page 31
Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities & Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives, and devices t...
Page 32
2-6 Peripherals LAN PXE Boot Option ROM & Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) SATA Controller(s) & Enables or disabl...
Page 33
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as...
Page 34
Init Display First & Specifes the frst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card, or the onboard graphics. Auto Lets BIOS automatically conf...
Page 35
Parallel Port & Enables or disables the onboard parallel port. (Default: Enabled) Intel(R) Smart Connect Technology ` ISCT Configuration & Enables or disables Intel Smart Connect Technology. (...
Page 36
Resume by Alarm & Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific tim...
Page 37
2-8 Save & Exit Save & Exit Setup & Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to ...
Page 38
Chapter 3 Drivers Installation Before installing the drivers, first install the operating system. • After installing the operating system, insert the motherboard driver disk into your optical drive. T...
Page 39
Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthoriz...
Page 40
Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New Taipei City 231,Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4003 Tech. and Non-Tech. Support (Sales/Ma...
Manual Details
| Brand | GIGABYTE |
|---|---|
| Pages | 40 |
| File Size | 14.77 MB |
| Published | June 03, 2026 |
49 views
Enter the captcha to get the download link:
Frequently Asked Questions
What CPU is required to utilize DDR3 1600 MHz memory?
To support DDR3 1600 MHz, you must install an Intel 22nm (Ivy Bridge) CPU.
Where can I find instructions for physical installation of components?
Refer to Chapter 1: Hardware Installation, which covers procedures for the CPU, Memory, and Expansion Cards.
How should I dispose of or recycle this equipment when it's no longer useful?
Contact your local government office or household waste disposal service for environmentally safe recycling instructions.