Nikon Compact Digital Cameras COOLPIX L32 Quick Start Guide - English

Preparing for Shooting

DIGITAL CAMERA

Insert the Batteries and Memory Card Turn the Camera On and Set the Display Language, Date, and Time

Open the battery-chamber/memory Date and t ime

Press the power switch to turn on the Set the date and time, and press the

card slot cover. camera. k button.

Quick Start Guide Hold the camera upside down to prevent the batteries from

The monitor turns on when the camera is turned on. Use JK to select a field and then use HI to set

falling out.

To turn the camera off, press the power switch again. the date and time. Select the minute field and press the k button to

Insert the batteries and Language confirm the setting.

Use the multi selector Edit

memory card. HI to select the desired Confirm that the positive (+) and When the confirmation screen is displayed, use HI to

language and press the

negative (–) battery terminals are

select Yes and press the k button.

oriented correctly and insert the k button. batteries.

Cancel

Confirm the correct orientation Press the A (shooting mode) button.

and slide the memory card in until Press this button in

Time zone and date

it clicks into place. Use HI to select Yes and press the shoot ing mode for shoot ing-mode

Memory card slot k button. Choose t ime zone and selec ion menu.

Thank you for purchasing the Nikon COOLPIX L32 digital camera.

set date and t ime

Before using the camera, please thoroughly read “Confirming the Package Contents” and “For Your Safety” on the reverse side for correct use of the camera. After reading, please keep this Yes

Close the battery-chamber/memory

manual handy and refer to it to enhance your enjoyment of your new camera. No

card slot cover. Cancel

The Quick Start Guide introduces the procedures necessary in using this camera for the first time. Scene auto selec tor

Use HI to select Scene auto selector

For more detailed information, please download the “Reference Manual” from the following URL.

and press the k button.

http://nikonimglib.com/manual/ Use JK to select your

New York Toronto, ima

Applicable Batteries

The Reference Manual can be viewed using Adobe Reader, available for free download from the home time zone and press

Two LR6/L40 (AA-size) alkaline batteries (included batteries)

Adobe website.

Two FR6/L91 (AA-size) lithium batteries

the k button.

Two EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries

About This Manual Press H to turn on daylight saving SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this manual. time (W is displayed above the Battery level indicator

Removing the Memory Card

In this manual, images are sometimes omitted from monitor display samples so that map).

Turn the camera off and make sure that the power-on lamp The camera enters the shooting Shooting

monitor indicators can be more clearly shown. Press I to turn it off.

and the monitor have turned off, and then open the battery- mode and you can take images in mode icon

Illustrations and monitor content shown in this manual may differ from the actual

chamber/memory card slot cover. Scene auto selector mode.

product.

Gently push the memory card into the camera (1) to Use HI to select the date format and press the k button. While shooting, you can check

partially eject the card (2). the battery level indicator and the

Printed in China

The camera, batteries, and memory card may be hot number of exposures remaining.

CT4J01(11)

immediately after using the camera.

Shooting screen

6MN55511-01

Number of exposures

remaining

Using the Camera

Shooting with Scene Auto Selector Mode Play Back Images Delete Images Using the Flash and Self-timer You can use the multi selector to set frequently used functions such as the flash and

Hold the camera steady. Press the c (playback) button to enter Press the l (delete) button to delete self-timer. Keep fingers and other objects away from the lens, You can set the following functions using HIJK in the shooting screen.

playback mode. the image currently displayed in the

flash, AF-assist illuminator, microphone, and speaker.

Flash mode

monitor.

Self-timer Exposure compensation

Zoom out Zoom in

Frame the picture.

Use the multi selector HIJK to Use the multi selector HI to

Move the zoom control to change the zoom

select an image to display. select Current image and press the Delete Macro mode

position.

To return to shooting mode, press the A button or

When the camera automatically determines the k button. X Flash mode

shutter-release button. Current image

scene mode, the shooting mode icon changes. You can select the flash mode to match the shooting conditions.

To exit without deleting, press the d button.

When e is displayed in full-frame playback Erase selec ted images Al images

mode, you can press the k button to apply an

n Self-timer

Press the shutter-release button effect to the image. Full-frame Playback

If you select ON, the camera releases the shutter 10 seconds after you press the shutter-

halfway. release button.

Select Yes and press the k button.

Move the zoom control toward

Deleted images cannot be recovered. Erase 1 image?

g (i) in full-frame playback mode to p Macro mode zoom in on the image. Use macro mode when taking close-up images.

When the subject is in focus, the focus area glows

green. Yes

o Exposure compensation

If the focus area or focus indicator flashes, the

You can adjust overall image brightness.

camera is unable to focus. Modify the composition and try pressing the shutter-release button halfway

The functions that are available vary with the shooting mode.

again. Move the zoom control toward

f (h) in full-frame playback mode

Focus area to display a list of images called

“thumbnails.”

Without lifting your finger, press the shutter- release button the rest of the way down. The indicator showing the number of exposures remaining or the indicator showing the maximum movie length flashes while images are being saved or while a movie is being recorded. Do not open the battery-chamber/memory card slot cover or remove the batteries or memory card while an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the memory card.

Shooting Features Using the Menus

Use the multi selector and k button to navigate the menus.

Set up

Changing the Shooting Mode Recording and Playing Back Movies The following menus are available. Use HI to select the desired menu

Time zone and date icon. Monitor sett ings

The following shooting modes are available. Date stamp

A Shooting menu

Display the shooting screen. The menu is changed.

Available by pressing the d button in the shooting screen. Elec tronic VR

Check the remaining amount of movie recording

x Scene auto selector AF ass ist

Allows you to change image size and quality, continuous shooting settings, etc.

time.

The camera automatically selects the optimum scene mode when you frame an image, Sound sett ings

making it even easier to take images using settings that suit the scene.

G Playback menu Available by pressing the d button when viewing images in full-frame playback

b Scene mode Press the k button.

mode or thumbnail playback mode. Allows you to edit images, play slide shows, etc. Time zone and date

Camera settings are optimized according to the scene that you select. The menu options become selectable.

Monitor sett ings

Movie recording time

D Movie menu Date stamp

remaining

D Special effects Elec tronic VR

Available by pressing the d button in the shooting screen.

Effects can be applied to images during shooting. AF ass ist

Allows you to change movie recording settings.

Press the b (e movie-record) button Sound sett ings

F Smart portrait

to start movie recording. z Setup menu

When the camera detects a smiling face, you can take an image automatically without

Allows you to adjust basic camera functions such as date and time, display language,

Date stamp

pressing the shutter-release button (smile timer). Use HI to select a menu option, and

You can also use the skin softening option to smooth the skin tones of human faces.

then press the k button.

Press the d (menu) button. Date

The settings for the option you selected are

A Auto mode Date and t ime

The menu is displayed. displayed.

Used for general shooting. Settings can be adjusted to suit the shooting conditions and the type of shot you want to capture.

Date stamp

Use HI to select the setting, and then

Press the A (shooting mode) button Shooting menu

Press the multi selector J. press the k button.

Image mode

in the shooting screen. The current menu icon is displayed in yellow. White balance The setting you selected is applied.

Date and t ime

Press the b (e movie-record) button again to stop Continuous When you are finished using the menu, press the d button.

recording.

Select a movie in full-frame playback Certain menu options cannot be set depending on the current shooting mode or the

Scene auto selec tor AV state of the camera.

Use the multi selector HI to select Menu icons

mode and press the k button.

When a menu is displayed, you can switch to shooting mode by pressing the shutter-

a shooting mode and press the Movies are indicated by the movie options icon.

release button, A (shooting mode) button, or b (e movie-record) button.

k button.

Movie options

Using View NX 2 Troubleshooting Install View NX 2 to upload, view, edit, and share photos and movies. If the camera fails to function as expected, check the list of common problems below

Transferring Images to the Computer before consulting your retailer or Nikon-authorized service representative.

Installing View NX 2

The camera is on but does not respond.

Choose how images will be copied to the computer. After Nikon Transfer 2 starts, click Start Transfer.

Wait for recording to end.

An Internet connection is required.

Choose one of the following methods:

If the problem persists, turn the camera off.

For system requirements and other information, see the Nikon website for your region.

SD card slot: If your computer is equipped with an SD card slot, the card can be

If the camera does not turn off, remove and reinsert the battery or batteries or, if you are

inserted directly in the slot.

Download the View NX 2 installer. using an AC adapter, disconnect and reconnect the AC adapter. Note that although any

SD card reader: Connect a card reader (available separately from third-party

data currently being recorded will be lost, data that have already been recorded will not

Start the computer and download the installer from:

suppliers) to the computer and insert the memory card.

be affected by removing or disconnecting the power source.

http://nikonimglib.com/nvnx/

Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the USB Camera turns off without warning.

Double-click the downloaded file.

cable. Turn the camera on. The camera automatically turns off to save power (auto off function).

The camera or batteries have become too cold and cannot operate properly.

Follow the on-screen instructions. Start Transfer

The inside of the camera has become hot. Leave the camera off until the inside of the At default settings, all the images on the memory card will be copied to the camera has cooled, and then try turning it on again.

Exit the installer.

computer.

Click Yes (Windows) or OK (Mac). Monitor is blank.

The camera is off.

Terminate the connection.

The batteries are exhausted.

If you are using a card reader or card slot, choose the appropriate option in the

The camera has entered standby mode to save power. Press the power switch, shutter-

computer operating system to eject the removable disk corresponding to the

release button, A button, c button, or b (e movie-record) button.

memory card, and then remove the card from the card reader or card slot. If the camera is connected to the computer, turn the camera off and disconnect the

Camera becomes hot.

USB cable.

The camera may become hot when used for an extended period of time to shoot movies or when used in a hot environment; this is not a malfunction.