HP f520 Car Camcorder Quick User Guide
Summary
This comprehensive user manual guides you through setting up and operating your car camcorder dashcam system. Learn how to securely mount the unit on your windshield and connect power using the provided adapter. The guide details advanced functions, including automatic video recording, motion detection for unexpected events, and emergency capture mode for crucial moments. Perfect for drivers seeking reliable and hands-free vehicle security and comprehensive journey documentation.
Page Summary Contents For HP f520 Car Camcorder Quick User Guide
Page 2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital camcorder, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable ...
Page 3
Battery warning The battery for this car camcorder is sealed internally. DO NOT attempt to disassemble the camcorder and remove the battery. Always charge using the provided system. Improper charging ...
Page 4
1 Introduction 1.1 Package Contents The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately. Camcorder Bracket CD-ROM Quick start guide ...
Page 5
1.2 Product Overview Top and Bottom Views Front View Side (Left and Right) Views Rear View No. Item No. Item 1 Bracket Socket 8 Up Button ( 2 Power Button 9 Down Button ( 3 Memory Card Slot 10 Enter B...
Page 6
2 Getting Started 2.1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the camcorder. Push the memory card until it clicks into place. To remove the memory ca...
Page 7
2.2 Installing in Vehicles 2.2.1 Mount to Windshield 1. Attach the bracket to the camcorder. Slide it into the bracket holder until you hear a click. 2. Before installing the bracket, please use alcoh...
Page 8
2.2.2 Adjust the camcorder position 1. Loose the knob to swivel the device vertically or horizontally. 2. Then tighten the knob to make sure the camcorder is securely locked in place.
Page 9
2.3 Connecting to Power Use only the supplied car adapter to power up the camcorder and charge the built-in battery. 1. Connect one end of the car adapter to the USB connector of the camcorder. 2. Plu...
Page 10
2.4 Powering the Camcorder On / Off 2.4.1 Auto Power On/Off Once the vehicle engine is started, the camcorder automatically turns on. If the Automatic Record function is enabled, the recording will au...
Page 11
3 Using the Camcorder 3.1 Recording Videos 3.1.1 Motion Detection If Motion Detection is activated, when power off the camcorder, the system alert message, “Press OK Key to Power off, or enter motion ...
Page 12
3.1.2 Emergency Recording During Video Recording, press the button to enter emergency recording mode, the “Emergency” message will be shown immediately on the upper left corner of the screen, and the ...
Page 13
3.2 Playback Videos and Photos To playback videos and photos, do the following: 1. During recording, press the button to browse for the desired video and photo file. 2. Press the / button to select th...
Page 14
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital camcorder, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable ...
Page 16
1 導論 1.1 包裝內容 以下為包裝內容物。若有任何遺漏或損壞項目，請立即聯絡您的經 銷商。 行車記錄器 托架 CD-ROM 光碟
Page 17
1 托架插孔 8 向上按鈕 ( 2 電源按鈕 9 向下按鈕 ( 3 記憶卡插槽 10 輸入按鈕 ( 4 USB 接頭 11 揚聲器 5 返回按鈕 ( ) 12 廣角鏡 6 LED 指示燈 13 麥克風 7 LCD 螢幕
Page 18
註： 1. 設備在開機狀態時，不要取出或插入記憶卡，以免損壞記憶卡。 2. 請使用 Micro SD 卡 10 級, 最高支援 32GB。 3. 使用前請先格式化 Micro SD 卡。 4. 若錄影中螢幕顯示"卡速過慢"，表示設備中的記憶卡寫入速度過慢，請更換卡 速較高的記憶卡。 5. 若錄影中螢幕顯示"記憶卡空間過於零散"，表示記憶卡已無法將錄製的檔案儲...
Page 21
1. 將電源連接器的一端連接設備的USB接頭。 2. 將電源連接器的另一端插接汽車內的香煙點火器的插孔。汽 車引擎一旦發動，設備即自動開機。 註： 1. 本設備僅適用產品所附之電源連接器，請勿使用其他廠牌以免設備燒毀或導 致電池爆炸。 2. 首次使用設備請將電池的電量充滿。 3. 若環境溫度達到 45°C 或以上，則電源連接器仍然可以供電給設備，但不會為 鋰聚合物電池充電。這是鋰的特性，不是故障。
Page 23
3 使用行車記錄器 3.1 錄影 3.1.1 移動偵測 若啟用移動偵測，當行車記錄器關閉電源時，螢幕上會出現 ”按OK 鍵將關機，或10秒後進入移動偵測“ 。指經過 10 秒後系統會自 動進入移動偵測模式，當設備偵測到鏡頭前任何物體移動時會自動 啟動錄影，持續錄影的時間同影片長度的設定。 設定移動偵側，其方式如下： 1. 按 按鈕，進入 OSD 目錄。 2. 按 / 按鈕選擇移動偵測 ，再按 按鈕...
Page 25
3.2.1 檔案刪除 檔案刪除，其方式如下： 1. 若正在錄影，按 按鈕，進入 OSD 目錄。 2. 按 / 按鈕選取檔案刪除，再按 按鈕。
Page 26
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital camcorder, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable ...
Page 29
1 托架插孔 8 向上按钮 ( 2 电源按钮 9 向下按钮 ( 3 存储卡插槽 10 输入按钮 ( 4 USB 端口 11 扬声器 5 返回按钮 ( ) 12 广角镜 6 LED 指示灯 13 麦克风 7 LCD 屏幕
Page 30
取出存储卡 推存储卡，弹出插槽。 注： 1. 设备在开机状态时，不要取出或插入存储卡，以免损坏存储卡。 2. 请使用 Micro SD 卡 10 级，最高支持 32GB。 3. 使用前请先格式化 Micro SD 存储卡。 4. 若摄像中屏幕显示"卡速过慢"，表示设备中的存储卡卡速过慢不敷使用，请立 即停止摄像并更换卡速较高的存储卡，以避免造成无效的摄像或文件损坏。 5. 若摄...
Page 33
1. 将汽车适配器的一端连接到设备的 USB 端口。 2. 将汽车充电器的另一端插接汽车内的香烟点火器的插孔。汽 车引擎一旦发动，设备即自动开机。
Page 35
3 使用行车记录仪 3.1 摄像 3.1.1 运动探测 若开启运动探测功能，当行车记录仪关机時，屏幕会出现 ”按 OK 键将关机，或 10 秒后进入运动探测” 。指经过 10 秒后系统会 自动进入运动探测模式，当设备侦测到镜头前任何物体移动时会自 动启动摄像。 开机后打开自动摄像，其设置方式如下： 1. 按 按钮进入 OSD 菜单。 2. 按 / 按钮选择运动探测，再按 按钮。 3. 按 / 按钮...
Page 37
3.2.1 删除文件 删除文件，其方式如下： 1. 如果正在摄像，按 按钮，进入 OSD 菜单。 2. 按 / 按钮，选取文件删除，再按 按钮。 3. 按 / 按钮，选取文件类型，再按 按钮。
Manual Details
| Brand | HP |
|---|---|
| Pages | 38 |
| File Size | 1.22 MB |
| Published | June 18, 2026 |
4 views
Enter the captcha to get the download link:
Frequently Asked Questions
What are the general rules for mounting the camcorder?
Install it near the rear-view mirror, ensuring the lens is within the wiping range of the wiper, and avoid installing it on tinted windows.
I see a 'Low Speed Card' error when recording; what should I do?
This means the memory card is too slow. You must replace it with a higher-speed micro SD card.
How do I know if my emergency file was saved after an incident?
Files recorded in Emergency Camera mode are protected and stored separately, preventing them from being covered by regular continuous recording cycles.
Can I service or replace the battery myself?
No. The battery is sealed internally, designed specifically for this camcorder, and should not be disassembled or replaced by the customer.