Gigabyte Motherboard GA-H81M-DS2V User Manual English (version 1002)
Summary
This comprehensive guide is essential for any builder setting up the GA-H81M-DS2V motherboard. It walks you through every step of proper component setup—covering precise hardware installation for the CPU, memory, and expansion cards. Furthermore, learn expert configuration via detailed BIOS Setup tutorials, including power management and system information accessed through the M.I.T. This manual is designed for PC enthusiasts and advanced users who require thorough instructions on building, optimizing, and troubleshooting their desktop build.
Page 1 Text Content
GA-H81M-DS2V
User's Manual Rev. 1002 12ME-H81DS2V-1002R
Page Summary Contents For Gigabyte Motherboard GA-H81M-DS2V User Manual English (version 1002)
Page 1
GA-H81M-DS2V User's Manual Rev. 1002 12ME-H81DS2V-1002R
Page 2
Motherboard GA-H81M-DS2V Motherboard GA-H81M-DS2V Sept. 13, 2013 Jun. 12, 2014 Copyright © 2016 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally ...
Page 3
Table of Contents GA-H81M-DS2V Motherboard Layout .............................................................................4 GA-H81M-DS2V Motherboard Block Diagram ...................................
Page 4
GA-H81M-DS2V Motherboard Layout KB_MS_USB CPU_FAN ATX_12V_2X4 SYS_FAN2 LGA1150 USB30_LAN DD R3 _1BAT i TE® Super I/O AUDIO DD R3 _2 GA-H81M-DS2V PCIEX16 Realtek® Gb E LAN SA TA SA TA PCIEX1_1 CODEC In...
Page 5
GA-H81M-DS2V Motherboard Block Diagram 1 PCI Express x16 CPU CLK+/- (100 MHz) LGA1150 CPU DDR3 1600/1333 MHz PCIe CLK Dual Channel Memory (100 MHz) DVI-D x16 MI (C en ter /S ub wo ofe PCI Express Bus ...
Page 6
Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic dischar...
Page 7
1-2 Product Specifications CPU Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1150 packag...
Page 8
Back Panel 1 x PS/2 keyboard/mouse port Connectors 1 x D-Sub port 1 x DVI-D port 2 x USB 3.0/2.0 ports 2 x USB 2.0/1.1 ports 1 x RJ-45 port 3 x audio jacks (Line In, Line Out, Mic In) I/O Controller i...
Page 9
1-3 Installing the CPU Read the following guidelines before you begin to install the CPU: Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) A...
Page 10
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode. 1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed. 2. When ena...
Page 11
Line Out Jack (Green) The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration. M...
Page 12
DEBUG PORT DEBUG DEBUG PORT DEBUG PORT 1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power...
Page 13
DE BU DE BU PO RT PO RT DE BU DE BU PO RT PO RT 5) SATA3 0/1 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Ea...
Page 14
8) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this header. Make...
Page 15
11) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch...
Page 16
Differing from traditional UEFI interface, the Dashboard Mode provides a fancy and user-friendly BIOS environment where users can easily point and click through various settings and make adjustments f...
Page 17
CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. CPU Frequency Displays the current operating CPU frequency. Adv...
Page 18
C3 State Support (Note 1) Allows you to determine whether to let the CPU enter C3 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state t...
Page 19
Profile DDR Voltage When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this item will display as 1.50V. When Extreme Memory Profile (X.M.P.) is set to Profile1 o...
Page 20
CPU Fan Speed Control Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal Allows the fan to run at different speeds according to the CPU temperatu...
Page 21
System Language Selects the default language used by the BIOS. System Date Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to switch between the Mon...
Page 22
Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled) Fast Boot Enables o...
Page 23
Windows 8 Features Allows you to select the operating system to be installed. (Default: Other OS) CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot pr...
Page 24
User Password Allows you to configure a user password. Press <Enter> on this item, type the password, and then press <Enter>. You will be requested to confirm the password. Type the passwo...
Page 25
Disabled The USB 3.0 ports are routed to the EHCI controller and the x HCI controller is turned off. All USB 3.0 devices function as High Speed devices regardless of x HCI software support/availabilit...
Page 26
External SATA Enables or disables support for external SATA devices. (Default: Disabled) Realtek PCIe GBE Family Controller This sub-menu provides information on LAN configuration. 2-6 Power Managemen...
Page 27
Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. Disabled Disa...
Page 28
Exit Without Saving Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press <Esc> to return to th...
Page 30
Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthoriz...
Page 31
FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea...
Page 32
Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Market...
Manual Details
| Brand | GIGABYTE |
|---|---|
| Pages | 32 |
| File Size | 10.68 MB |
| Published | May 31, 2026 |
84 views
Enter the captcha to get the download link:
Frequently Asked Questions
How can I check my motherboard's revision number?
The revision number is labeled 'REV: X.X.' on the board (e.g., 'REV: 1.0').
What should I do before updating the BIOS or drivers?
You must check your motherboard's current revision number first.
Where can I find detailed product information and limitations?
Refer to the '1-2 Product Specifications' section of the manual for details.
How do I report a technical question about this board?
You can submit a technical or non-technical query by linking to http://esupport.gigabyte.com.